How to repair burnt spark plug wire

[RECHRGD]

When changing out my spark plugs I noticed that the wire going to #7 had come in contact with a header pipe and had burned through the outer most covering.  The wires are accel 8.8 and are only sold in full sets.  I don't want to buy a whole set for one wire.  The wire still works fine as most of the inner insulation is still in tack.  Is there any type of high heat tape or shrink wrap that could be used to repair this? 

[cdr]

contact them direct,they will sell you 1 wire.

[RECHRGD]

Really!  Thanks, I'll try that.....

[firefighter3931]

Bob, If you don't have any luck just shoot me a PM and i'll get a custom wire built to your specs. It won't be an Accel wire however. 


Ron

[cdr]

Bob, If you don't have any luck just shoot me a PM and i'll get a custom wire built to your specs. It won't be an Accel wire however. 


Ron

RON IS A GREAT GUY!!!

[RECHRGD]

Bob, If you don't have any luck just shoot me a PM and i'll get a custom wire built to your specs. It won't be an Accel wire however. 


Ron

Thanks Ron!