Anyone using 17x11 AR500 or VN500 wheels on their charger?

[Lord Warlock]

as I measured them the fronts are 24.5 tall and rears are 24.75 inches,  26 would look better to me.  fronts look taller but rear is actually higher

[petohazy]

Thanks for the pics, looks good!  For my plans, I am going to keep hunting for something in the 27" plus range and suitable for regular highway use.  Found 295/50SR16 (rated 118 mph) from BF Goodrich that may work.  From what I understand they run a bit wider, and should be around 27.6" tall.  Now I need to find a 16x10 Magnum 500 style wheel (guessing 5" BS).

A few pics, excuse the dirty wheels, haven't cleaned em off for a bit after wetsand and buffing with compound.  But you can see how they sit in the wheelwells and get an idea of width.  I was able to install the original magnum 500 center caps, after ordering a set of adapters from year one, they are just the cups that mount inside the wheel and tighten down with two small bolts to the center cap, the originals won't fit because the diameter of the hole isn't the same as 15 inch magnums.  They were pretty cheap.

Front wheel, 245/45 on 17x8 inch rims


Rear tire width


Rear tire height