News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

how to tell cast from steel 440 crank...

Started by DoubleDlover, April 04, 2014, 01:53:38 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

DoubleDlover

April 04, 2014, 01:53:38 PM
When at the swap meet. How can you tell if a 440 crank is cast or steel? Numbers? shapes? Anything? thanks

flyinlow

#1
April 04, 2014, 02:27:37 PM
Cast crank has a bulkier damper labeled cast crank only. If the damper is with it. Cast cranks look cleaner in the unmachined areas.



http://www.dodgecharger.com/forum/index.php/topic,67235.0.html

BSB67

#2
April 04, 2014, 03:51:26 PM
Quote from: flyinlow on April 04, 2014, 02:27:37 PM
http://www.dodgecharger.com/forum/index.php/topic,67235.0.html

The information that you need is at the very bottom of that thread posed by Flyinlow

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

John_Kunkel

#3
April 04, 2014, 06:35:59 PM
If you're trying to ID a bare crank, the parting line on the casting/forging is how to ID them.
Pardon me but my karma just ran over your dogma.

DoubleDlover

#4
April 05, 2014, 12:35:40 AM
there we go!!!.. No it will be easy. thanks dude!!!
Print
Go Up Pages1
User actions