News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Piston Slap - questions

Started by XH29N0G, March 09, 2014, 01:49:26 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 All
User actions

flyinlow

#50
April 03, 2014, 01:37:35 PM
The factory used to put a foil wraped insulator under the intake and on top of the valley cover to help reduce engine noise in Grandpa's New yorker. Had yellow fiberglass inside if I remember correctly .  Might help.

c00nhunterjoe

#51
April 03, 2014, 02:39:49 PM
You could aslo turn the radio up.....lmao.  :smilielol:

cudaken

#52
April 03, 2014, 09:50:22 PM
Quote from: flyinlow on April 03, 2014, 01:37:35 PM
The factory used to put a foil wraped insulator under the intake and on top of the valley cover to help reduce engine noise in Grandpa's New yorker. Had yellow fiberglass inside if I remember correctly .  Might help.

That was more to help heat soaking of the carb I think. :scratchchin:
I am back

Challenger340

#53
April 04, 2014, 08:59:56 AM
Ahhh CRAP !
Word is out...
there goes the neighborhood... now Diamond Pistons will be OVERWHELMED !! and getting my Custom stuff done from Panetta will take months !

Been using Diamond for years.... TOP DRAWER !! in both the Product and Service :2thumbs:
Only wimps wear Bowties !
Print
Go Up Pages 1 2 3 All
User actions