Legendary Rallye Bucket Seats

[SwiftJonny]

Has anyone tried these out?  Is it a kit to install on a factory seat frame and rail or is it a complete seat?  Do the stock head rests fit?  These would be a great upgrade so I quit falling out of my seat around corners.
https://legendaryautointeriors.com/30481/68-CHARGER-RALLYE-BUCKET-SEATS-PEARL-WHITEPRL-WHT-WPRL-WHT/detail.html

[charlie45]

Has anyone tried these out?  Is it a kit to install on a factory seat frame and rail or is it a complete seat?  Do the stock head rests fit?  These would be a great upgrade so I quit falling out of my seat around corners.
https://legendaryautointeriors.com/30481/68-CHARGER-RALLYE-BUCKET-SEATS-PEARL-WHITEPRL-WHT-WPRL-WHT/detail.html

Those look pretty nice man

Not cheap though...

[SwiftJonny]

Pricey yes, but I really don't want aftermarket seats.  They just don't look right in these cars in my opinion.  I love the factory look to them.  This is on my wishlist, maybe as a winter project.  If it is a kit to go on existing seats, it'll be fun to give re-upholstering seats a try.

[daytona71]

Looks like a kit, you use your existing frames.

[Mike DC]

Looks like a kit, you use your existing frames.

Original frames are worth as much as an entire new aftermarket seat.  And the adjustments suck. 

It's not a bad product.  But you'd have to be pretty wedded to the original seat appearance for it to be worth it IMO.  if you just want something decent with more bolstering then there are too many better options out there.

 

[charlie45]

Looks like a kit, you use your existing frames.

Original frames are worth as much as an entire new aftermarket seat.  And the adjustments suck. 

It's not a bad product.  But you'd have to be pretty wedded to the original seat appearance for it to be worth it IMO.  if you just want something decent with more bolstering then there are too many better options out there.

 

But I have to agree with SwiftJonny that Legendary seemed to hit the nail on the head by combining the perfect OEM look with improved sport seating functionality... Most of the "other" options all have the modern look which imo just does not fit in these cars...

I'm pretty impressed with this product, may just have to order myself a set... 

[SwiftJonny]

Yes, I've seen aftermarket seats or modern seats taken out of other models/brands of cars and installed.  They look too large and out of place.  The interior of the Charger is so minimalistic, that if you put a large, high-backed bucket seat in, it just takes away from it.  I probably would never have considered changing the seats until I saw these.  The other thing is, I'm in Saskatoon, SK, Canada.  There just isn't much for other options.  I don't have easy access to the salvage or the network of parts like you guys do in the US.  Ugh, that just reminded me, our dollar stinks right now.  I've got to add 11% to this price, plus the added shipping.  Maybe I'll wait and hope the Canadian dollar goes up.

[Mike DC]

I agree the original appearance is worth something.   I'm more persuaded against the original seats because they lack adjustments and aren't safe in a wreck. 

[SwiftJonny]

You're right on both.  They have no adjustment whatsoever, and even a parking lot fender bender, they'd throw you into the steering wheel.  Has anyone found a seat that looks good in these cars and has the modern comfort and safety features?

[Dino]

I have been looking for a way to keep the stock look while adding support for quite a while.  Short answer is there is no simple solution.  The best I have found so far is to make your own seat foam, or adapt the stock foam, and use stock covers.  Not easy to do but worth it.  Or you can buy modern low back seats and cover them in stock appearance.  Likely the route I'm going as it'll give me full power and lumbar support and I should be able to add my stock headrests.  As a bonus you can fill the bucket with soft foam so the seats will look fairly flat but give you full support when you sit down.  I will have my covers made in leather so I don't have to adjust a stock cover either which makes it a little easier I suppose.

Additionally I will have three point retractable shoulder belts and a center armrest and those help to keep you in place as well.   

[Mike DC]

                
I was having a PM conversation with Dino about this last year.  I got partway through a custom seat-building job for a '69 but got distracted by other stuff.  The job isn't done yet, gonna finish it eventually.

I ended up with 1995 Toyota Camry front buckets.  (Yes I tried to find something American first.)  I'm not done with the job yet but I'm sold on this donor seat.  They're getting some cutting/welding to make them closer to the shape of a 69 low-back Charger seat.  Not sure about the padding & cover situation yet.  

I chose this seat because:
--  size is close
--  donor vehicle isn't rare/expensive,
--  has several adjustments, but all are manual,
--  has locking mechanisms on both sides of the seatback for safety.  

[myk]

You're right on both.  They have no adjustment whatsoever, and even a parking lot fender bender, they'd throw you into the steering wheel.  Has anyone found a seat that looks good in these cars and has the modern comfort and safety features?

Do they look out of place?  I guess.  I could even take out those giant head rests and make them look like the seats you linked to.  But in this case I needed function over form, especially considering I drive my car harder than other classic car owners.  But, I like the seats you linked to in your first post.  Then again, they don't look very "OEM" to me however.  Let's face it; the OEM look is fine if that's what you want, but you can't expect it to compete with a modern seat in function...

[SwiftJonny]

Those would look not bad with the factory small headrests, but I need white.  That would mean re-covering them in pearl white vinyl... which would probably cost me at least $700, but most likely a lot more.  There's a great upholstery shop here in town, but they are expensive.  I live in Saskatoon, SK, Canada.  There's nothing here for custom shops.  I'm in the Northern boonies.

[Dino]

Those would look not bad with the factory small headrests, but I need white.  That would mean re-covering them in pearl white vinyl... which would probably cost me at least $700, but most likely a lot more.  There's a great upholstery shop here in town, but they are expensive.  I live in Saskatoon, SK, Canada.  There's nothing here for custom shops.  I'm in the Northern boonies.

With some SEM vinyl dye you can have any color you want.

[bill440rt]

 

[krigel]

What seats are those white ones, and who recovered them?

[bill440rt]

What seats are those white ones, and who recovered them?

Seats are Corbeau GTS II's. I had them done by a local custom upholstery shop who made up the covers after the stock pattern.

[fy469rtse]

They look beautiful bill , very nice touch, judging from the look of the levers , they flip forward or access to rear

[SwiftJonny]

Those look fantastic!