Year One Engine Harness

[ChargerRob]

I'm considering ordering an engine harness from Year One for my 69 charger modified for electronic ignition and upgraded 70 style alternator. Has anyone used it and do you recommend it. Thanks in advance.   

[twodko]

Don't buy anything from YO if possible. They rape you on shipping charges just because they can and
you'll find the same part(s) you need cheaper elsewhere.
I bought a new front lights harness from Classic Industries MOPAR catalog online. It's made by M & H Electrical,
same place YO gets it from and the shipping is reasonable. 

[b5blue]

I use one from Evans, very nice. 

http://www.evanswiring.com

[Mopar Nut]

Yearone has the best wiring for Mopar's, they bought the licensing rights from Chrysler and sell to Classic/others. 

[twodko]

It's still made by M & H

[Mopar Nut]

It's still made by M & H

I know, I have the complete wiring from them with shipping only costing $22.00.

[Lord Warlock]

I got one from year one, and it seems to be the right one.  Still working out a few of the connections near the washer tank and horns, but that isn't the fault of the harness, just my failing memory and a missing horn relay.  I didn't think the shipping costs were that bad for the harness, the front rotors was more than would have liked but not as bad as I've had elsewhere for smaller lighter parts. 

[twodko]

Pardon, I wasn't criticizing. M & H makes excellent stuff regardless of the source vendor.

[Mopar Nut]

Pardon, I wasn't criticizing. M & H makes excellent stuff regardless of the source vendor.

You're right, YearOne's shipping is outrageous.

[Just 6T9 CHGR]

I use one from Evans, very nice. 

http://www.evanswiring.com

Bill Evans made my engine harness as well.  I had it custom tailored for the dual field charging system, elect regulator & elect ign ...been in there 12+ years with no troubles

[68pplcharger]

.

[Carrnutt]

I'm considering ordering an engine harness from Year One for my 69 charger modified for electronic ignition and upgraded 70 style alternator. Has anyone used it and do you recommend it. Thanks in advance.   

YES!   

I got both the dash and the modified engine harness from YO when they had a discount code on for harnesses (RARE). Awesome pieces! M&H rocks.  Everything fit, worked and looked as it should. 

Rather than drill my firewall, I mounted the ignition module on the rear of my intake using a raised aluminum bracket (I think I got it off of EBAY). It bolts on using 2 of the valley pan rail bolts and raises it up off the intake, but behind & under the carb / air cleaner. In fact with my Performer RPM intake, you can't really see it from any angle. 

I also purchased harnesses for my mom's 65 malibu. Also from M & H, and again, great quality and functionality.

[ChargerRob]

I ordered the engine harness from Year One with a discount code. The raise bracket for electronic ignition. Can you post a picture.  Thanks. 

[Carrnutt]

Sorry for the delay, but here is a link to the one I purchased on ebay.

http://www.ebay.com/itm/MOPAR-Big-Block-ECU-Bracket-PROBLEM-SOLVER-Dodge-383-440-DRILL-NO-HOLES-68-69-70-/231128895022

[ChargerRob]

Thanks carrnutt.  Going to order one. 

[Hard Charger]

I'm considering ordering an engine harness from Year One for my 69 charger modified for electronic ignition and upgraded 70 style alternator. Has anyone used it and do you recommend it. Thanks in advance.   

I have done the very same thing. however my car is just going back together and I have not started it yet. did it on my Challenger though and there was no problem.

[SwiftJonny]

I ordered all the wiring for my car from YearOne, plus a few odds and ends.  I used a coupon code to get the price down a bit.  Shipping was only $50.15 to Saskatoon, SK, Canada.  That price wasn't ridiculous at all.  Great product.  They were great to deal with too.  They gave me a $25.00 coupon because the headlight adjustment kit I ordered was on back order and delayed my whole wiring order.  When the back order was finally shipped, it was shipped at no charge.

[will]

Cool Bracket, just ordered it. nice hiding spot for the ecu.