'68 Charger wheel opening moldings

[Q5XX29]

So, I can get a set of these from Summit for 149.99, or 229.99 from Classic Industries. That is quite a price difference. Does anybody know if the quality is comparable, or is this a situation of "you get what you pay for" ?

[bull]

I've only seen originals and one sold by Year One years ago. The Y1 part looked the same when installed but it was very flimsy compared to the original. If I had to guess I'd say most of the repros are not going to be as good as the originals so the difference may just be the price. Like I said though, my experience is limited.

[fy469rtse]

Yep bulls right , not as good in quality, be careful but has benefits as well,
There made thinner or softer than the originals, this helps as you are able manipulate them to fit better,
I used a low adhesion masking tape to cover fender edge to protect paint , once I finished working it to fit, removed the screws , took the tape off and refitted, I found it easiest to start at front of wheel arch and work my way around

[Charger-Bodie]

There are two companies making these. That's not saying the two prices you have are these two,but maybe. I hate to recommend year one ,but that's one of the few things I get there. They carry the better ones and they aren't even that bad for price on this particular item.

[Q5XX29]

Thanks for the tips, folks. I know the ones from Summit are made by Goodmark, and the guy I spoke with at Classic Industries said that theirs has a different part number, so perhaps it is the same as the ones sold by Year One. The price is comparable, but I had a 25% off coupon and a gift card from Classic Industries!