News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Ballast resistor supply side?

Started by Crazy440, March 05, 2014, 09:45:18 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Crazy440

March 05, 2014, 09:45:18 PM
I no longer need the ballast resistor.  Looking to replace it with a 3 line mini fuse block.  I know it's not a fused circuit.  What kind of amps can I pull on it? 
Thanks
I used to have a handle on life....but it broke off.

Crazy440

#1
March 06, 2014, 08:56:17 AM
Any thoughts?
I used to have a handle on life....but it broke off.

cdr

#2
March 06, 2014, 12:15:47 PM
15 amps ? if you need more set it up with a relay .
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

John_Kunkel

#3
March 06, 2014, 02:41:20 PM

What do you intend to power with the fuse block?
Pardon me but my karma just ran over your dogma.

Crazy440

#4
March 06, 2014, 06:15:13 PM
Just some low wattage lights.  Tac , temp ,oil pressure, trans temp gauge lights.
I used to have a handle on life....but it broke off.
Print
Go Up Pages1
User actions