Chysler's training videos on YouTube

[StockMan]

I found these old Chrysler factory training videos today on YouTube, if you haven't seen them take a look.
They are referred to as 'Chrysler Master Tech' and MTSC.

There are many volumes that cover off lots of topics/years.

I found this one interesting, it gets into carburation for 1969, like the AVS and Holley setup.
http://www.youtube.com/watch?v=IiJagoc5vhU

[Ghoste]

Great link!

[StockMan]

Yeah, and there are lots of them.  
I think they must have been delivered on vinyl records, half way thru each video the commentator says to flip the record.

The ignition/timing video is a good one to.
http://www.youtube.com/watch?v=eh6J-blmKbg

One thing they pointed out, that I didn't know, was that pulling the coil wire (to distributor) so that the engine won't start can damage the coil.
They recommend disconnecting the +ve wire from the coil instead.

[tsmithae]

Way cool!

[StockMan]

This one on differential gear setting is good to.
http://www.youtube.com/watch?v=BBA8KjUGsXw

[A383Wing]

those are pretty good...I'm gonna download a lot of those to my computer..I think I'm gonna need a bigger hard drive

[chargerbr549]

Those are pretty interesting I have some of those training slides and records from the dealership I used to work at as a kid, they were cleaning out the break room so I saved them from being thrown out, the projector was missing but I finally found some at a garage sale so I can watch them if I want to, although now it would be easier to just watch them on youtube!

[StockMan]

Here's the one on performance.
http://www.youtube.com/watch?v=rvzotL7DsnA