factory rocker arms

[71green go]

OK...I want to change back to the Factory rocker arm setup for my 440......I currently have ISKY DI adj rocker arms, which for the life of me I cannot set properly...and since My engine os relatively mild I can use OEM ones...
However all the sets i see do not come with spacers/shims between rocker arms...are they required?....I would assume yes

Mancini racing is currently out of stock for their complete set...Summit sells individuals with no shims/spacers

Any where else I can buy a new complete setup?

I have new banana cut shafts from Mancini so do not need those

Thanks
Steve

[moparsr2fast]

  If you are running a hydraulic  lifter cam, you can use the factory rockers.  Yes, you will need the spacers. I have an extra set if interested.

[71green go]

  If you are running a hydraulic  lifter cam, you can use the factory rockers.  Yes, you will need the spacers. I have an extra set if interested.

Sent you a PM
Steve