Slant Six Carburetor

[73ChargerSE]

I just bought a '71 Swinger and the Holley carb that is on it needs to be replaced.  It is a 1 bbl.  Does anyone know the model number of the carb offhand?

Thanks
Paul

[Chryco Psycho]

I would switch to the alum 2bbl intake & use the 2300 series Holley 2 bbl , the /s run far bettter this way

[Headrope]

Not trying to sound insulting, but have you checked the carb? Most single barrel carbs I've seen had the info stamped into it.

[Rocky]

go to partsamerica.com  A new carb runs a little over 100$.  Or you could get a rebuild kit for less than 10$

[nh_mopar_fan]

Better yet, go find a 70's Super 6 setup in a boneyard and switch to the 2bbl. It's a pretty straightforward swap.

http://www.slantsix.org/articles/supersix/article.htm

[hemihead]

I would switch to the alum 2bbl intake & use the 2300 series Holley 2 bbl , the /s run far bettter this way

I agree, this is the way to go.

[73ChargerSE]

Not trying to sound insulting, but have you checked the carb? Most single barrel carbs I've seen had the info stamped into it.

The car isn't at my house.  It's on the other side of town, I was just trying to see if anyone knew offhand.

[Headrope]

Sorry. I don't know.
I can second - or third?- the super six swap. Did it to a 67 Dart GT I  had. Worked rather well.