Six pack setup on a '69

[66FBCharger]

Will a (440) Six pack setup (with a stock air cleaner) fit under the hood of a '69 Charger, without hitting the inside of the hood? I am assuming it will fit since it was available in '70.
Anyone have pictures of their '69s with Sixpacks on them?

[Ghoste]

Yes it will.

[A383Wing]

it will, as long as your car has 3 speed wipers....if you have 2 speed wipers, the air cleaner will hit the wiper motor....

also, lid will hit AC compressor if yours is so equipped

[b5blue]

 I notched my air cleaner base to clear the 2 speed wiper motor on my 70. 

[66FBCharger]

Crap! I have two speed wipers. I don't want to cut the original base (its for my '70 Road Runner).
Year one used to make fiberglass bases. Maybe if they still make them, that would be a cheap way out.
I was thinking about putting the six pack on just for fun.
Thanks for the feedback.

[bill440rt]

Yes, it will fit. I have a 6-pack on my '69, like others have stated it will clear a 3-spd wiper motor with no issues.
There is also a Sanden A/C compressor on top, I only had to radius the air cleaner base just slightly to get it to clear.

[1974dodgecharger]

Wow just wow bill 

[RGA]

I bet that's why my wipers have always been weird. Maybe a 2 speed switch with 3 speed motor. I have a six pack n my 69 and wonder if someone swapped wiper motors to clear. They have never worked right.

[Ghoste]

How so?

[b5blue]

Yea how so? We wanna know... How many "clicks" do you feel at the switch? 

[hemi68charger]

Crap! I have two speed wipers. I don't want to cut the original base (its for my '70 Road Runner).
Year one used to make fiberglass bases. Maybe if they still make them, that would be a cheap way out.
I was thinking about putting the six pack on just for fun.
Thanks for the feedback.

You should be able to find a 3speed motor and switch relatively easy. They are not difficult to swap out, especially if you're putting a six pack on your car.... It is worth the effort.... Believe me... 

[bill440rt]

 
I think all that is needed is the motor, 3-speed bellcrank, and 3-speed wiper switch. The dash harness should already have the provisions for the 3-speed switch.
Anything else missing? 

[66FBCharger]

Switching to a 3 speed wiper setup would be good. I would like to have 3 speed wipers.
The bellcrank is the part that goes onto the back of the wiper motor? Are all the 3 speed bellcranks the same? I think I have a wiper motor and switch. I will have to check if the bellcrank is still on the motor.

[moparfan53]

I think all that is needed is the motor, 3-speed bellcrank, and 3-speed wiper switch. The dash harness should already have the provisions for the 3-speed switch.
Anything else missing?  

According to passion4mopars.com there is a "3 speed bushing" also needed.

http://www.passion4mopars.com/Mopar-2-Speed-to-3-Speed-Mopar-Wiper-Motor-Conversion_b_1.html

[moparfan53]

...The bellcrank is the part that goes onto the back of the wiper motor? Are all the 3 speed bellcranks the same? I think I have a wiper motor and switch. I will have to check if the bellcrank is still on the motor.

As far as I know, you need a 68-70 B body bellcrank/arm.

[Passion4Mopars]

Crank arm part number for your mid 68-70 3 speed wiper motors is 2822273.  A two speed crank arm will bind the motor and usually if you have a 2 speed switch/3 speed motor you get one speed and it will only park where you shut it off at, and same goes for 3 speed switch and 2 speed motor, one speed and will only park where you shut it off at.  Everything else remains the same.

I have had a few people tell me that they got away with using the 2822272 crank arm (A body) by parking the motor and THEN putting the wiper arms on.  I don't have one of every make and model to try out, ohhhh I wish I did, but I trust what I'm being told, don't have any reason to doubt it?

The bushing you need I also have and the plated clips.