Radio removal

[twodko]

I removed the radio bezel in my 69 and there is a bolt on either side of the radio......obviously mounting bolts.
My question is after these bolts are removed does the radio pull straight out or does it get pushed back a bit then
tilted down and removed from the bottom of the dash?

[Ghoste]

As I recall it should come straight forward.

[timmycharger]

There is also a stud in the back of the radio that gets attached to the dash frame with a nut. I had to pull my factory 8 track back and then down and out from my 68 

[tan top]

There is also a stud in the back of the radio that gets attached to the dash frame with a nut. I had to pull my factory 8 track back and then down and out from my 68  

yeah same deal to get a push button thumb  wheel radio out also    comes out the passenger side down past the console  , easier removing  ash tray & glove box liner

[Bob T]

Thanks for the tip Tan, have to get mine out sometime and make it work too.

[68 RT]

 t comes out from the back, you will also have disconnect the defrost vent tubes.

[tan top]

  by pure fluke , looking at the red Daytona on ebay , has a picture of said rear radio attaching stud / nut / dash frame bracket