News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Pilot bearing question?

Started by javakmcharger68, March 06, 2006, 07:47:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

javakmcharger68

March 06, 2006, 07:47:19 PM
Trying to set up a 383 4speed & I was wondering about if the pilot bearing holes in these two steel cranks would be deep enough for the trans to fit. Any way to tell? Also wondering if in the first picture what you see in the back of the crank is a pilot bearing or not? Thanks

RallyeMike

#1
March 07, 2006, 12:00:42 AM
#1 has a pilot BUSHING in it.

Looks like #2 is drilled for one.
1969 Charger 500 #232008
1972 Charger, Grand Sport #41
1973 Charger "T/A"

Drive as fast as you want to on a public road! Click here for info: http://www.sscc.us/

Chryco Psycho

#2
March 07, 2006, 04:26:04 AM
I agree

tecmopar

#3
March 07, 2006, 06:37:03 AM
I agree also about pic #1 but it looks to be kind of egg shaped or really worn at the bottom, good luck.

Chryco Psycho

#4
March 08, 2006, 01:09:23 AM
just looks like a ding at the edge of the bushing to me , but it can`t hurt to replace it
Print
Go Up Pages1
User actions