66 charger trim clips

[Alberta83]

Hi there. New guy here. We have a 66 charger with the stainless/aluminum/chrome trim that runs down the hood,doors and trunk along the bodyline but someone previously attached this with 3M tape. What exactly is this trim called and does anybody know what kind of clips we need to properly attach this. Thanks in advance.

[ODZKing]

Ridge trim and the clips look like this for the quarters.
Doors and fenders below that.
AND there is a left and right trim to each side. 8 pieces total on 66.

[Alberta83]

Excellent. Thank you. I will try and hunt some of those down now that I know what they are

[Ghoste]

Are any of them available new?

[ODZKing]

I know Doug has had the quarter clips, here is his EBay store http://stores.ebay.com/Winslow-Motorsports
The door and fender main ones are 6001910 and ends are 6003053 (2 fenders) (4 doors)
Quarters are 6003018.  So if you see them they should say "replaces #.
Also this place has the quarter clips, (last from bottom) http://www.bresco.com/acatalog/Metal_Moulding_Clips.html

[Ghoste]

Thanks.  If I keep the 67 I am going to need those.