News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dyno Run results on my car ; Stockish 68 Charger R/T 440

Started by Bob T, December 31, 2013, 06:53:18 PM

Previous topic - Next topic

Bob T

Had a dyno run done yesterday, the guy is a good operator and was able to find another 45 rwhp in there which was a great result.
I knew it had a bit of a cam in it, but it was unknown what it was or how it performed. I'd fitted a new Rev-N-Nator ignition system last month but the engine just was'nt making the power that I thought it should. I had a run at the drags the other month, but it was a dissapointing 15.1 best, it will be better now  :2thumbs:

The settings if anyone was interested are;
440 with stock heads, 727, 3.23, Holley 750 vac sec, 2'' Headers by Doug, Torker manifold, new Accel dizzy & Rev N Nator, NGK BP5 S . No vac advance
15' initial ( I know its well below the 18 -22' that Ron and co usually recommend, but our gas is only 95 and I believe it is rated lower than American octane 95)
33' total, 800rpm idle, 11'' vaccum in drive at idle, 4.5 power valve, m/jet 72, yellow sec spring

Max power was 280.79 at 4450 rpm
Max Torque was 353.41 at 3650 rpm
Losses  at 5120 rpm were 168hp making 252 for a total of 420hp at the crank.
Fairly happy with the result, more for the fact that it is making all the power that it can now.

I did a clip as well

http://www.youtube.com/watch?v=ZO8rUeZcRi8


(Looks sideways at better head and cam packages now    :lol:)
Old Dog, Old Tricks.

68X426

Kelvin, that's a fine way to start off the new year.  :2thumbs:

Are you going to hunt for more horses (new heads) or just keep it as is?






The 12 Scariest Words in the English Language:
We are Here from The Government and
We Want to Help You.

1968 Plymouth Road Runner, Hemi and much more
2013 Dodge Challenger RT, Hemi, Plum Crazy
2014 Ram 4x4 Hemi, Deep Cherry Pearl
1968 Dodge Charger, 318, not much else
1958 Dodge Pick Up, 383, loud
1966 Dodge Van, /6, slow

BSB67

Nice.  Thanks for sharing.  I bet your fun meter was pegged.

So, what was your mph with that 15.1 et?, and specifically what was done to gain 45 hp?  Going back to the track soon?  Keep us posted.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

Bob T

Quote from: 68X426 on December 31, 2013, 07:35:20 PM
Kelvin, that's a fine way to start off the new year.  :2thumbs:

Are you going to hunt for more horses (new heads) or just keep it as is?


Hell Yes  :lol:   the Hemi upgrade you mean??  :icon_smile_big:

A good 440 head and cam package is on the wishlist Dan, but I have just brought another new guitar and that was  :o a lot, probably around the price of heads anyway, so the fun coupons are having that exhausted feel about them at the moment.

One of the good things on D.C. is the amount of info on performance upgrades and advice too, it has helped me out immensely.
Old Dog, Old Tricks.

Bob T

Quote from: BSB67 on December 31, 2013, 07:49:24 PM
Nice.  Thanks for sharing.  I bet your fun meter was pegged.

So, what was your mph with that 15.1 et?, and specifically what was done to gain 45 hp?  Going back to the track soon?  Keep us posted.

Fun meter was pegged haha, I seem to remember the mph was 94, I was hoping to get into the midlow 14 - high 13's but not that day.
Just carb tuning mainly for the result and changed the power valve too, although, we did find the kickdown lever was restricting the wide open throttle slightly as well.
The next drag day will be Feb 24 unless I head down to a night drag, maybe I will, I'm quite keen to see what it will do now.
Old Dog, Old Tricks.

myk

45 rwhp; can you feel that difference?  I'd imagine that's a big kick in the pants...

Bob T

Quote from: myk on January 01, 2014, 03:20:17 AM
45 rwhp; can you feel that difference?  I'd imagine that's a big kick in the pants...

Yes, more in the mid upper range, a lot more pull/torque , definitely noticable  :2thumbs:
Old Dog, Old Tricks.

fy469rtse

Bob , I think that's one of your better photo's of the girl, need to line that front bumper up , mainly at the sides bob with the two side l brackets unless there missing,

1974dodgecharger

Quote from: fy469rtse on January 01, 2014, 05:45:53 AM
Bob , I think that's one of your better photo's of the girl, need to line that front bumper up , mainly at the sides bob with the two side l brackets unless there missing,

heh, I think your right he is missing the side supports with grill bolts.

tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Cooter

" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

Bob T

Quote from: 1974dodgecharger on January 01, 2014, 05:56:17 AM
Quote from: fy469rtse on January 01, 2014, 05:45:53 AM
Bob , I think that's one of your better photo's of the girl, need to line that front bumper up , mainly at the sides bob with the two side l brackets unless there missing,

heh, I think your right he is missing the side supports with grill bolts.

Correct on both counts, but the bumper has a small twist in it, more pronounced on the pas side without a bracket to restrain it, I should really see if I can get hold of one from somewhere. And it always stands out  :brickwall:  :lol:
Old Dog, Old Tricks.

RECHRGD

Bob, how is that dyno able to calculate drivetrain loss?  168 hp seems excessive.
13.53 @ 105.32

Cooter

I know different chassis dynos sometimes read different. Some calculate for more loss than parasitic drivetrain loss.
Some high stall converters REALLY mess with your "At the feet" numbers, along with huge (tall) rear tires.
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

fy469rtse

Bob AMD make those brackets for the sides , sorry mate to pick on it, when your cars such a high quality little things stand out, with the side brackets you will be able to get the twist out of it by force using the brackets, never had a front bumper that didn't need some manipulation,
I drive myself crazy being critical of everything I have done , wishing I could go back and redo or do better metal work

Bob T

Quote from: Cooter on January 01, 2014, 07:56:05 PM
I know different chassis dynos sometimes read different. Some calculate for more loss than parasitic drivetrain loss.
Some high stall converters REALLY mess with your "At the feet" numbers, along with huge (tall) rear tires.
Quote from: RECHRGD on January 01, 2014, 05:20:21 PM
Bob, how is that dyno able to calculate drivetrain loss?  168 hp seems excessive.

Hey, I totally agree, it does seem high, I would've thought the loss would remain a constant ratio but I can only go with what the operator told me - he has built a lot of big hp engines for race boats and race cars and has a lot of experience to draw on.
I'm still not completely convinced the losses are that high, and hey, I'm definitely no expert.
Thats what the print out said .
The machine is a Dynojet, and the the stall is stock Cooter, well as far as I know .
I also think the heavy Magnums 15 x 10 also contribute to the losses.

What I forgot to do and I'm kicking myself now, is to do a pull as it is and then change out my Rev N Nator with the stock orange Chrysler unit to see what the gain was. Maybe next time

The a/f stayed fairly stable so it looks like the carb is fine.
Its been quite interesting just seeing what power it makes and thanks for your comments and tips Guys
Old Dog, Old Tricks.

Bob T

Quote from: fy469rtse on January 01, 2014, 08:57:07 PM
Bob AMD make those brackets for the sides , sorry mate to pick on it, when your cars such a high quality little things stand out, with the side brackets you will be able to get the twist out of it by force using the brackets, never had a front bumper that didn't need some manipulation,
I drive myself crazy being critical of everything I have done , wishing I could go back and redo or do better metal work

Hey mate ,no prob, I don't take offense easily
I didn't know they were available and hadn't made it a priority either, but yeah we did a mag shoot last year and it stood out like dogs balls , well to me at least anyway, I will look at doing something about it  :icon_smile_big:
Old Dog, Old Tricks.

RECHRGD

Quote from: Bob T on January 01, 2014, 10:02:25 PM
Quote from: Cooter on January 01, 2014, 07:56:05 PM
I know different chassis dynos sometimes read different. Some calculate for more loss than parasitic drivetrain loss.
Some high stall converters REALLY mess with your "At the feet" numbers, along with huge (tall) rear tires.
Quote from: RECHRGD on January 01, 2014, 05:20:21 PM
Bob, how is that dyno able to calculate drivetrain loss?  168 hp seems excessive.

Hey, I totally agree, it does seem high, I would've thought the loss would remain a constant ratio but I can only go with what the operator told me - he has built a lot of big hp engines for race boats and race cars and has a lot of experience to draw on.
I'm still not completely convinced the losses are that high, and hey, I'm definitely no expert.
Thats what the print out said .
The machine is a Dynojet, and the the stall is stock Cooter, well as far as I know .
I also think the heavy Magnums 15 x 10 also contribute to the losses.

What I forgot to do and I'm kicking myself now, is to do a pull as it is and then change out my Rev N Nator with the stock orange Chrysler unit to see what the gain was. Maybe next time

The a/f stayed fairly stable so it looks like the carb is fine.
Its been quite interesting just seeing what power it makes and thanks for your comments and tips Guys


I had always been under the impression that drivetrain loss was in the 20% range with an automatic trans.  In simplistic terms your Dyno is showing a 1.5 multiplication factor from the wheel numbers to flywheel hp.  I thought that to be ridiculous until finding that most stock 440/375 magnum cars put down around 250 hp at the wheels.  250X1.5=375, hmmmm.  That would put my combo at just under 500hp at the flywheel and I never thought I was anywhere near that. :shruggy: :shruggy:
13.53 @ 105.32

Cooter

20% with stick shift, and around 30-35% for auto depending on stall...
Did you know it takes an extra 30 hp just to turn a Dana 60?
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

RECHRGD

So a stick shift car with a Dana gives up how much hp compared to one with a 8 3/4?
13.53 @ 105.32

Cooter

Again, all these are estimates at best. But roughly an automatc Dana car should see about 40% loss.
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

War wagon

Quote from: Cooter on January 01, 2014, 07:56:05 PM
I know different chassis dynos sometimes read different. Some calculate for more loss than parasitic drivetrain loss.
Some high stall converters REALLY mess with your "At the feet" numbers, along with huge (tall) rear tires.

Very true , speaking from experience I can tell you it has a lot to do with the operator and how they control the settings. Results can vary depending on Dyno settings.
So many factors
Dyno jet is one of the Highest reading dyno's, in my experience either Dyno dynamics or mustang dyno's give the most accurate results.

To the original poster Congrats on your results, a well tuned car is a lot more fun to drive!!
I plan on putting mine on the Dyno in the next year or two once it's transformation is complete.
Thanks for sharing your results :cheers: :2thumbs:

myk


1974dodgecharger

Heh, bobs got 250 something with 440 makes me thinkin I got 120hp with my 383, ghee. Im able to fish tail with 14inch magnums but now cant with 20s back there only spin my tires up to 3rd gear and can smell them in car.   

Cooter

Well to be fair here, spinning tures doesn't require as much HP as it does TORQUE.
This is why I lol when I see a musclecar posted on FB with 1000 HP and low profile tires.
Low profile tires have soft rubber, but a hard carcass. Neither on the street, require mych torque to blow them away.

Now, wanna see just how much loss you have? Bolt on a set of uber sticky tires and zip it up to tg e track.

" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"