Brake hose that connects from the hard line to a Dana 60

[MxRacer855]

I'm looking for the brake hose/line that clips on to the bracket bolted on to the undercarriage, connecting the rear hard line to a Dana 60 rear end. I had to cut the old one off of my 8-3/4 rear end.

Does anyone have a link to one? I just want to make sure I've getting the correct one.
Thanks

Jeff

[Charger-Bodie]

Www.megapartsusa.com

[John_Kunkel]

Common part, any auto supply will have one.

[MxRacer855]

Thanks guys. I didn't know if it was something special or not.

[FJMG]

Only thing special is that the 60 is longer than the 8.75 but you could make anything work if need be.

[MxRacer855]

So should I just bring the old rubber line to the auto store and have them match it with one that's a few inches longer if possible?

[Charger-Bodie]

http://www.megapartsusa.com/proddetail.asp?prod=129%2DHSP3399 Dana one.

http://www.megapartsusa.com/proddetail.asp?prod=129%2DHSP4015 8 3/4 one.

[John_Kunkel]

In the real world the only difference between the two listed is 1/8" in length. For that reason many suppliers only list one sized for both the Dana and 8 3/4".

[MxRacer855]

Thanks guys! Just ordered one from Mega!

[MxRacer855]

With that, the same brake hoses going from the hard lines to the drums on an 8.75 rear end will work for discs on a Dana 60? I'm doing the 8.75 Drum to Dana 60 Disc conversion.