News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Anyone use a gear ratio changer reducer on a speedo?

Started by XH29N0G, December 21, 2013, 08:59:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

XH29N0G

December 21, 2013, 08:59:04 PM
I have a TKO 600 and just wore through a 23 tooth speedo gear after a very short time.  The teeth on the speedo gear are so thin that they wear easily and I had a binding speedo that may have made it worse. 

I see gear reducers online at placed like http://www.ebay.com/bhp/speedometer-gear-ratio-adapter and assume this might let me run a speedo gear with fewer (stronger) teeth.  Have any done this?

Thanks in advance.
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....
Print
Go Up Pages1
User actions