Help ID these parts...

[sanders7981]

These are parts that go somewhere on the door or window according to the plastic bag that had other door items in it.   I need some help id'ing these... Also, anyone know where I can get the little rubber bumper inside the interior door handle lever, see second pic. 

Door/window items??  I know the four clips in the left are for the arm rests... I need four more, anyone grot some spares ? 


Interior door lever


I think these clips go to the headliner bows... Anyone know?

[fy469rtse]

Ok clips on left are to insert in inner door frame , armrest screw holes,
Two metal strips looped with a screw in one end, I think they hold the rod in place that goes from internal handle to door catch.
Broken blue plastic tab with inner round sleeve, is the rivet to hold glass onto winding frame
The two plastic rivets with screws in them are in front or rear of glass , can't remember exactely , but there a stop for glass
Bottom photo are the clips for trim that goes along side openings roof lining, trim piece each side of inside roof, I think you need at least five per side. They slide in from end of trim evenly spaced for that piece to clip on.
Second photo , inner latch or door handle, fits near where front of arm rest ends,
Door locking knob, to the right looks like a factory service manual not well used yet judging from how clean the pages are lol, maybe 1/2 and 3/8 long reach sockets,

[hawkeye]

" maybe 1/2 and 3/8 long reach sockets"          I am guessing 7/16 and 9/16, new style, Craftsman, 3/8's drive.     

[sanders7981]

   ok... I should have been more specific lol. 

[ODZKing]

The 2 in the center could be for wiper motor linkage

[tan top]

Ok clips on left are to insert in inner door frame , armrest screw holes,
Two metal strips looped with a screw in one end, I think they hold the rod in place that goes from internal handle to door catch.
Broken blue plastic tab with inner round sleeve, is the rivet to hold glass onto winding frame
The two plastic rivets with screws in them are in front or rear of glass , can't remember exactely , but there a stop for glass
Bottom photo are the clips for trim that goes along side openings roof lining, trim piece each side of inside roof, I think you need at least five per side. They slide in from end of trim evenly spaced for that piece to clip on.
Second photo , inner latch or door handle, fits near where front of arm rest ends,
Door locking knob, to the right looks like a factory service manual not well used yet judging from how clean the pages are lol, maybe 1/2 and 3/8 long reach sockets,

the centre two with the allen head bolt /screw , look like  are for the vent window frame  ,  

[70 sublime]

The last picture  of the 2 clips

The skinny part of the clip clips over the edge of the headliner (3-4 clips per side of car)
And the fat part of the clip snaps into the metal channel that fills the space between the head linner and the rubber weather seal under the edge of the roof