News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Chevy type pushrods?

Started by BrianShaughnessy, March 20, 2006, 12:49:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BrianShaughnessy

March 20, 2006, 12:49:23 PM
Nobody much seems to care on moparts... so just ask here too.

Anybody see why I can't run ball ball pushrods with chevy oiling holes in the 440 with the 528, comp solid lifters, and comp mag. rockers?   I need about 9 3/8 (9.375).

I can call up Smith Bros. for probably about $200+r or I can call Summit for HE's (9.378) preassembled for $38. 
Black Betty:  1969 Charger R/T - X9 440 six pack, TKO600 5 speed, 3.73 Dana 60.
Sinnamon:  1969 Charger R/T - T5 440, 727, 3.23 8 3/4 high school sweetheart.

Chryco Psycho

#1
March 20, 2006, 02:02:16 PM
I do not see a problem as long as the ball is the correct diameter

BrianShaughnessy

#2
March 20, 2006, 02:52:30 PM
Says 5/16" ball on each end which is basically what I need.   And the length is good...   So if they're wrong it's not like the first time I'd have wasted $50 on something  :P    They're actually for a Buick.

Black Betty:  1969 Charger R/T - X9 440 six pack, TKO600 5 speed, 3.73 Dana 60.
Sinnamon:  1969 Charger R/T - T5 440, 727, 3.23 8 3/4 high school sweetheart.

Just 6T9 CHGR

#3
March 20, 2006, 03:28:08 PM
I think the custom length Comp Cams ones I got for my 440 had the oiling hole as well.....
Chris' '69 Charger R/T

dkn1997

#4
March 22, 2006, 07:07:44 PM
I run big block chevy pushrods with oiling holes  in my 440.
RECHRGED
Print
Go Up Pages1
User actions