best place to get a drive shaft ??

[Highbanked Hauler]

 I have to replace the drive shaft in sons Challenger as it was a 318-904 now its a 440-727 and I need to get a new drive shaft.. So do you have one made or can you buy one over the counter.  Thanks

[green69rt]

Here's one source...

http://www.doctordiff.com/strange-engineering-driveshaft.html

[cudaken]

I had mine made 29 years ago by Bob Glenden drive shaft shop. Double walled stainless steel, if I brake it, the world will rotate backwards for a while. 

Look at 4X4 shops locally, if you don't want to do the mail order thing.

Cuda Ken 

[fy469rtse]

I'm not even from any where there and I used D T S for all my yokes and universal's , they offered the service , but too big an item to ship to Australia, so just bought all the yoke ends for shaft and new correct length slip yoke from them 

[mopar0166]

Not STRANGE!  took them 8 weeks to ge me a correct driveshaft.  Never again!

[greymag]

Mancini Racing offers them

[John_Kunkel]

Since shipping can affect price, I'd look in the local Yellow Pages for a driveline specialty shop.

[War wagon]

Not sure where you are but I had one made this past summer at Baers performance near Windsor Ontario.
Heavy duty chromoly with billet strange yoke, SFI certified and balanced. Not cheap thou was 800 Canadian

[y3chargerrt]

http://www.dennysdriveshaft.com/

[Highbanked Hauler]

Not sure where you are but I had one made this past summer at Baers performance near Windsor Ontario.
Heavy duty chromoly with billet strange yoke, SFI certified and balanced. Not cheap thou was 800 Canadian

  I'm in Raleigh Nc. and there are  a few off road shops around here to check plus I didn't think of Mancini's  Thanks gang..

[John_Kunkel]

Here's some listings in your area.

http://www.yellowpages.com/raleigh-nc/driveshaft-repair

[Highbanked Hauler]

Here's some listings in your area.

http://www.yellowpages.com/raleigh-nc/driveshaft-repair

    Thanks John,   I never thought to check the phone book, Lights are on but nobody is thinking.....

[RallyeMike]

A big 2nd for Denny's Driveshafts. I run their basic aluminum shaft with lifetime U-joints in the 72 road racer. Absolutely beautiful and balanced to perfection.

[ACUDANUT]

Since shipping can affect price, I'd look in the local Yellow Pages for a driveline specialty shop.

X2

[MxRacer855]

Strange Engineering makes amazing drive shafts. Custom built to your specs.