News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 Charger Vinyl Top Moldings

Started by AKMat, November 10, 2013, 12:07:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AKMat

November 10, 2013, 12:07:53 PM
I have been able to find the "Check-Mark" shaped moldings that run from the rear glass to the corner of the sail panel, but have had no luck with the long straight piece of molding that connects to it and runs along the quarter to the quarter glass


Does anyone know a source where I could get a pair?

ACUDANUT

#1
November 10, 2013, 01:20:19 PM
Don't know what a Mounlings is, but if it's what I think it is...All 3 years will work.

AKMat

#2
November 10, 2013, 01:25:06 PM
Quote from: ACUDANUT on November 10, 2013, 01:20:19 PM
Don't know what a Mounlings is, but if it's what I think it is...All 3 years will work.
:smilielol: Sorry - I needed another cup of coffee.

Any ideas on a source?

fy469rtse

#3
November 10, 2013, 05:02:23 PM
Not reproduced, hit the guys on here to see if anyone will sell you spares.
I have one left over, slight kink so would have to be re-worked and polished, but I'm too far away from you , so on here or ebay, that where I sourced mine, rt specialitys for the clips, they step in size along trim, I will check , I think its a right hand one , yes they are left and right pieces

Mike DC

#4
November 11, 2013, 12:02:07 PM
The inner "check-piece" half is made of pot metal so it got reproduced.  It's a fragile item that commonly gets broken and usually needs rechroming even when it still exists. 

The outer pieces you are looking for are stainless sheetmetal.   Can be straightened, can be repolished, and not prone to breakage or rust.  So it hasn't been reproduced so far.

All 3 years interchange as far as I know. 

Troy

#5
November 11, 2013, 04:32:59 PM
There are lots of those floating around because, as mentioned, they are stainless and last many times longer than the "check mark" pieces. There are usually a couple sets for sale in the classifieds. I may have some but that would require me digging through the garage and counting sets to make sure I have enough for my cars.

Troy
Sarcasm detector, that's a real good invention.

Moparparts

#6
December 12, 2013, 05:23:33 PM
I have quite a few of those moldings PM or e-mail me

sanders7981

#7
December 13, 2013, 09:29:35 PM
I have one that I will not be using, maybe two but I haven't looked for the other piece yet.  I am in the process of polishing up my trim parts now.  I don't know if it's the passenger or driver side, but I think it is dent free. 

sanders7981

#8
December 14, 2013, 06:50:25 PM
Correction... I have both pieces.  Just polished up one of them, will be polishing the other next.

Print
Go Up Pages1
User actions