News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Correct tail moulding/trim screws

Started by TexasGeneral, October 22, 2013, 11:18:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TexasGeneral

October 22, 2013, 11:18:31 PM
My charger didnt have the tail moulding/trim so I bought the trim but cant find the correct screws.. should be 9 screws total ..2 for the corners and 7 for the trunk lip moulding/trim... Anyone
know a resource to purchase the correct screws?? :shruggy:

TexasGeneral

#1
October 23, 2013, 08:21:17 PM
Nothing? are they wheel moulding screws? general use mopar screws? 1inch? 1/2"? anyone?

bill440rt

#2
October 23, 2013, 08:30:11 PM
The ones that hold the long horizontal piece are the same as the wheel opening molding screws.  :yesnod:
The trim ends just get held in with chrome oval head screws. About an inch long IIRC?  :scratchchin:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

TexasGeneral

#3
October 23, 2013, 09:07:12 PM
Thank you very much Bill!
Print
Go Up Pages1
User actions