News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Window Part? - Need Help Identifying

Started by 69fourspd, October 21, 2013, 02:17:49 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

69fourspd

October 21, 2013, 02:17:49 PM
I am putting in the side glass and in my mix of parts I have two plastic pieces which appear a screw goes into. I think they are for the windows, but cannot be sure. Picture below, but if any one can help identify what this is and where it goes I would appreciate the help. Thanks!

tsmithae

#1
October 21, 2013, 02:42:27 PM
Looks to be, goes on the interior of the car, can't remember its purpose...

Check out my full thread and progress here.

http://www.1970chargerregistry.com/mboard/index.php?topic=119.0

cdr

#2
October 21, 2013, 03:33:20 PM
the rear upper pad screws into that, see the hole on the end.


LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Just 6T9 CHGR

#3
October 21, 2013, 04:09:35 PM
Quote from: cdr on October 21, 2013, 03:33:20 PM
the rear upper pad screws into that, see the hole on the end.



I concur :thumbs:
Chris' '69 Charger R/T

69fourspd

#4
October 21, 2013, 05:36:22 PM
Perfect! Thanks guys.  :2thumbs:

HeavyFuel

#5
October 22, 2013, 02:40:02 PM
Yep.   :yesnod:

No need to really tighten the pad screws too much, the plastic could be stipped out a bit, plus the seat back will hold the door pads in place pretty well.
Print
Go Up Pages1
User actions