News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

74 ralley dash gauge replacement

Started by jdscofield, October 17, 2013, 08:09:43 PM

Previous topic - Next topic

jdscofield

Has any one replaced the gauges in their 71-74 ralley dash?  if so, could you please let me know where you purchased them or even better, the brand and part numbers.  my gauges are slowly dying, lol
MOPAR or no car

moparguy01

I used autometer guages in mine with the factory rallye dash style bezel. The 3 3/8" speedo and tach fit almost perfect in the holes in the center, I used some dense foam around the edge and epoxied some braces on the back side to hold them tight. Then i put 2 of the 2 5/8" guages in the small parts.

I know that still leaves you lacking guages, but I made a custom dash and molded 3 more into the dash where the a/c vents were, since I eliminated the a/c vent setup.

ODZKing


CDN72SE

I purchased my individual guages off eBay, they show up every once in a while.
1972 Charger SE

jdscofield

Thanks for all your help guys.  may have some more questions for you all later.
MOPAR or no car