very bummed

[cdr]

well as y'all know i changed my direction on the charger & cut in all the jams & started putting the car back together,i wanted to get it drivable,the old 383 sounded great so that was my plan,,to drive & work on it & build the 511 as money was available,well i worked on getting all my pulleys lined up & updated the alternator, was checking the timing & pulled the dist to recurve the advance, i found the oil pump drive bushing was wiped out & the cam is GRINDING away at the lifters
[ going flat ] ,so my charger project is done for awhile   

[4cruzin]

Well that sucks!   

[Ghoste]

Ouch!  Sorry to hear that man.

[Charger-Bodie]

Sorry to hear this Charlie. I am bummed for you....

[charge69]

Man,  that is some really bad luck! Things will take a turn for the better, just keep a positive attitude and, "whatever you do, do not give up hope" (from the movie The Life Of Pi)!

[myk]

Man,  that is some really bad luck! Things will take a turn for the better, just keep a positive attitude and, "whatever you do, do not give up hope" (from the movie The Life Of Pi)!

I absolutely love Life of Pi; in addition to the great story it broke my preconception that any special-effects laden film will have a crappy story (Avatar, "new" Star Wars, you name it).

'OP, like Ron always says, now you have an excuse to tear it down and build it up to be stronger than ever!

[charge69]

Hello MYK,   The Life Of Pi  was a stunning movie that everyone I recommend seeing it to agrees!  I loved it too!  Charlie,  better days are down the road for you and your project.  May not seem like it now but,  it will happen.  Just have faith and, above all,  "do not give up hope"!

[tan top]

 arrr no !! damn it , sorry hear / see this ,     never knew or realised that could happen  

   

[RIDELIKEHELL]

So sorry to hear this man keep your head up 

[bull]

I know how you feel. When I first got my '68 in 2004 I planned on just getting it running and stopping so I could enjoy it a little before starting the restoration. Well that didn't go so well. There was a bad vibration somewhere that I couldn't find and all I ever got was one short drive around the neighborhood (maybe 1/2 mile) at about 5 mph. It felt like the crank was bent or way out of balance. So I sat on it for quite a while longer and finally started tearing it all down. During the tear down is when I found out that the bellhousing was simply loose at the block but it had done some damage. By then it was too late and I had committed to the resto.

Soon enough I realized you've just got to keep plugging away if you're ever going to realize your dream. It may come fast or it may be slow but it will come if you keep at it and never give up. Nothing worth having comes easy or quick.

[charger Downunder]

What caused it to do that.? I feel for you.

[Baldwinvette77]

Awww shit 

well if it makes you feel any better things arent going much better for me and my engine... mostly because im missing alot of stuff and things were mixed up 

if that were my car, and i was building another engine for it like you are, i'd run the current engine into the ground just as anger management 

[cdr]

What caused it to do that.? I feel for you.

the car sat non running since 1980 & i bought it in 2011,when the people i got it from got it running they should have pulled the intake & poured oil on the cam & primed the oil pump.

[RGA]

Sounds like one of my days lately

[Bob T]

Damn, what a kick in the guts. Like bull said, just keep plugging away, just do what you can when you can afford it dollar or timewise. Make a plan and keep chipping.

For the record, I hated the pi movie, thought it was garbage, only went to see it 'cause my wife wanted to, she should've taken her mother and everyone would've been happy. 

Now, Rush, thats a good movie   

[cdr]

thanx everyone for the encouragement!!!   

[nvrbdn]

i got a cam and lifters i took out of my 383. it only had break in, and a couple trips around the block on it. stock build cam. lifters are boxed and numbered. would that get you back on track?

[cdr]

the people on DC.COM are an awesome group of people,thank you so very much for the offers for parts,i think i am just gonna start slowly workin on the new engine,there are lots of things i can get back to while i save a little money for the build,i will start by finishing the port work on my cyl heads. i got them over a year ago & have only done one port,so that should keep me busy for awhile. only 15 ports to go & 7 combustion chambers.   

thanx again for the support from a great bunch of guys.

charlie

[NHCharger]

That suxs, sorry to see that.

[Fred]

That suxs, sorry to see that.

Me too.

[cudaken]

What caused it to do that.? I feel for you.

the car sat non running since 1980 & i bought it in 2011,when the people i got it from got it running they should have pulled the intake & poured oil on the cam & primed the oil pump.

Charlie, good chances that would not have helped. I am guessing they changed the oil, but did they add Zinc to the oil?  If they used oil off the shelf and did not add zinc it was doomed. EPA made the oil company's remove zinc from oil for a Greener World.  For a roller lifter cam, not a problem. For flat tappets, flat cam.  I stumbled across this post by accident.

http://www.dodgecharger.com/forum/index.php/topic,46015.0.html

If you have read my post I stated my 68 Road Runner for the first time after letting her sit for 8 years. Luckily I found the above post. I preoiled the heck out of the motor, used break in lube on the cam and added zinc. Engine sounds great but now it is starting to tick some from the left bank. Hopping it is just the start of a header leak, but I have the flat cam fear.    Still wonder if I should have added more zinc.

I may all so have a cam laying around you would be welcome to.

Cuda Ken

[fy469rtse]

Good one ken , do a patch up on the old engine, first pull it and see how much that has travelled ,if crank surfaces not too bad through in a cam new lifters and rod bearings , flush out the oil gallerys best you can , you only want to enjoy it for the odd blast, or is this the block your going to use for the new build,   

[JB400]

Two steps forward, one step back   Keep your chin up, you'll get there

[Indygenerallee]

That sucks Charlie, Gonna have to pinstripe "Glutton for punishment" on the Charger somewhere because in the end any of us that get these cars done are!! 

[Mytur Binsdirti]

Is theat engine undercoated or just plain dirty? 

[cdr]

Is theat engine undercoated or just plain dirty? 

that is original dirt & oil lol,if is was hemi dirt it would be worth more 

[Ghoste]

Be clear though, it has to be original Hemi dirt not the reproduction stuff.

[Cooter]

Hell Charlie...that ain't nuttin budda excuse to dump a nice fat cam in it and keep ridin.
Throw in a purple shaft .474 280 and ride on my brutha from anutha mutha !

[nvrbdn]