News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

anyone from houston area

Started by tom-cat, October 16, 2013, 10:51:53 PM

Previous topic - Next topic

tom-cat

just thought i would ask i have a few extra parts that im going to get rid of and shipping would be crazy  :popcrn:

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

tom-cat

ha ha , iwas just reading your dirty whiteboy post. doesnt look like you need any of the engine parts i have left over  aka stock stuff . but im going to have a bunch of other things left ,trim,couple decals ect. theres is a car show in kemah every saturday night at the home depot,some day we should meet up and talk charger over there. that is kinda far for you . is there any shows out your way.

cdr

they have some out here,i havent been to any,west houston muscle puts on a get together all the time,would be nice to meet you & talk cars


charlie
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

tom-cat

heck yea. i really need to check out another charger being though i didnt take this one apart it would be nice to see another and talk to someone who knows these bad boys.

tom-cat

OOO HELL yea i just checked out the west houston muscle car web site and that looks great  the pics of the ladies aint to bad either . couple of month hopefully and i will be ready to roll.

shart70rt

I am in Silsbee, 1/2 hour N of Beaumont.

Putting my 70 RT back together now.

I think there is a muscle car swap meet in Conroe sometime in the next few weekends. Usually has a good turnout.

I will check on it and post the dates.

What parts do you have available?

Stephen
Stephen Hart
1970 Charger RT, 440, console 4-speed, Dana 60 3.54
500 Stroker, Edelbrock Heads, Edelbrock intake, dual 600 CFM Carbs,
Comp Hydraulic Roller
Centerforce Dual Friction Clutch setup, Passon Performance overdrive gearset in 833 18 spline 4 spd.
TTI 2 inch headers and 3 inch exhaust.
Subframe connectors
P-S-T polygraphite suspension
4 wheel disc brakes
Classic Auto Air AC
Billet Performance Serpentine Assy
reassembly in progress

tom-cat

i heard of one in livigston this weekend not real sure . i have a stock intake,water pump ,exhaust headers and carb right now.
right in the center of the pic

shart70rt

I have a friend looking for a 1970 proper intake. How much for it and the carb? You have much the same stuff laying in your driveway and grass as I have laying on the floor in my shop.
Stephen Hart
1970 Charger RT, 440, console 4-speed, Dana 60 3.54
500 Stroker, Edelbrock Heads, Edelbrock intake, dual 600 CFM Carbs,
Comp Hydraulic Roller
Centerforce Dual Friction Clutch setup, Passon Performance overdrive gearset in 833 18 spline 4 spd.
TTI 2 inch headers and 3 inch exhaust.
Subframe connectors
P-S-T polygraphite suspension
4 wheel disc brakes
Classic Auto Air AC
Billet Performance Serpentine Assy
reassembly in progress

tom-cat

well as far as price just a good offer will do , not even sure how much they go for ,if i can help somebody i will be glad to do it . this is just the stuff that was in the car when i got it home lol.just let me know when ya wanna come get it.

tom-cat

I have two complete steering columns also .

hemi68charger

I am in Cypress, Northwest Houston Metro-area......

You selling as a package deal or individual parts? Looks like you have a couple of good pieces there....
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

TexasGeneral

I might want that column in the pic .. It might be worth the 4 hour drive from Dallas for the right price

shart70rt

Here is the link to the Conroe Swap Meet Nov 1 to Nov 3.

http://www.hotrodsoftexas.com/conroef.shtml

Stephen
Stephen Hart
1970 Charger RT, 440, console 4-speed, Dana 60 3.54
500 Stroker, Edelbrock Heads, Edelbrock intake, dual 600 CFM Carbs,
Comp Hydraulic Roller
Centerforce Dual Friction Clutch setup, Passon Performance overdrive gearset in 833 18 spline 4 spd.
TTI 2 inch headers and 3 inch exhaust.
Subframe connectors
P-S-T polygraphite suspension
4 wheel disc brakes
Classic Auto Air AC
Billet Performance Serpentine Assy
reassembly in progress

tom-cat

either way is good ,as a whole or just one whaterever. cool thanks for the link i am going to be there for sure.

tom-cat

ok texasgeneral let me know if your really interested ,pm me a email address and i will give you detailed photos and send you a phone number , let me know

tom-cat

also have a black plastic fan shroud