News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1969 Dodge Charger Window Lift Bracket Please "HELP"

Started by FARMER, October 15, 2013, 04:27:23 PM

Previous topic - Next topic

FARMER

Hello;
When trying to roll down the drivers side window I heard a snap sound. I took the door panel off and look in and seen a bracket inside laying on the bottom. There is a plastic piece looks like stuck in a hole in the window glass a stud like faceing the drivers side. I see no other pieces. How does the bracket go on? What direction? Where do I get parts? to fix? What parts do I need.
How does it go together? What tools do I need. Please help.
Thank you.

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

FARMER

A very special thank you for the two that gave adivise on what too do. The parts are ordered, when recieve we are
back on the road again. Thanks so much. Farmer