yellow Daytona on Ebay

[tan top]

    

http://cgi.ebay.com/ebaymotors/1969-Dodge-Charger-Daytona-440-4-speed-DANA-rear-orig-4-speed-Daytona-/111184835153?pt=US_Cars_Trucks&hash=item19e321f251

[tan top]

 

[tan top]

 

[tan top]

 

[DAY CLONA]

Overpriced, needs a "correct" restoration....great car if you "like" yellow, and being cash poor, car rich

[hemi68charger]

Could be a good car for someone........... 4-speed added bonus................. 

[Dave Kanofsky]

Why would one not clean the car before taking the pics for the ad???

And, it's missing the headrests...

[hemi68charger]

Why would one not clean the car before taking the pics for the ad???

And, it's missing the headrests...

I didn't want to say, but it's missing a lot..............

[maxwellwedge]

Does that K-Frame look ok to you all?

[hemi68charger]

Does that K-Frame look ok to you all?

It's one of the 440-hemi K-Frames........

[maxwellwedge]

Yes....wonder if that skid was added or a Hemi K was modified for the 440 mounts. If so, it may have had an elephant in there at some time....drag racing? Might explain the seats as well.....but, this is all pure conjecture...

[hemi68charger]

Guess I will wait to see if this thing sells before I put mine back on.......... 

[nascarxx29]

Wasnt this the Mario car same vin XX29L9B379725
http://www.dodgecharger.com/forum/index.php/topic,51836.msg566476/topicseen.html#msg566476

[nascarxx29]

This one 379725.Its a known car but was recored as wrecked and or parted out .It was put back together But I seen alot of differences from minor to major inncorrect brake booster the trunk hinges and straight nose channel brackets were fabricated .It was wearing a glass nose and valance .It is a automatic car currently but was originally a 4 speed it had a dana.Wasnt matching numbers .The rad support might have been replaced hood had the ribs.The welds and fabricated bracket to latch tray area didnt look right to me .The weather strip area on dr side where number would be was was already pulled up previously .I dont recall seeing a number there.I was going to look underneath for evidence as to the bolt heads from the tabs holding the wing braces and bolt that held scissors jack.To further investigate this cars origins.Came back later the following day it was on the trailer going

[nascarxx29]

  Its Y2 and 4 speed .Dollar for dollar Id sooner have Troys daytona.Y2 car has to much uncertain history

[hemi68charger]

Its Y2 and 4 speed .Dollar for dollar Id sooner have Troys daytona.Y2 car has to much uncertain history

Thanks for the vote of confidence........ But, everyone's looking for a bargain........ major bargain..........................

[tan top]

Its Y2 and 4 speed .Dollar for dollar Id sooner have Troys daytona.Y2 car has to much uncertain history

  yep , if I had the dough & was in the market for a Daytona , as much as I love Y2  
would  go AB Troys Daytona   

[maxwellwedge]

Haha - The AB handle stuck - didn't it? 

[hemi68charger]

Haha - The AB handle stuck - didn't it? 

Yeap, give it some time,,,,,,,,,,,,, it'll be added to the Webster Dictionary...........

[BigBlockSam]

no batt hold down . i hate that . it's so easy to do

[held1823]

i had this photo saved, but none showing the car.  no idea where i got it from, but it was likely from this site at some point in time, leading me to think there is another old thread here?

[hemi68charger]

i had this photo saved, but none showing the car.  no idea where i got it from, but it was likely from this site at some point in time, leading me to think there is another old thread here?

Probably.. That particular car has seen this forum a bunch of times.........

[held1823]

yeah, i see now that the photo came from this thread

http://www.dodgecharger.com/forum/index.php/topic,25779.0.html

[Beep Beep Dave]

Does this car have an original steel nosecone on it?

Dave

[Aero426]

Does this car have an original steel nosecone on it?

Dave

No, it's still fiberglass.   A potential buyer asked the seller this past week.