largest width white letter tires for 15x10 steel rims

[rockitier350]

looking for the largest white letter tires that would fit a 15x10 steel wheel . just kicking around idea`s.

[68X426]

Go to summitracing.com and use the filter tool on their tire selection. You get an assortment of brands and types real quick. Serves as a good starting point for your consideration, then you can shop all the internet for that tire.

[triple_green]

widest or tallest? with the right backspacing, some here get 295 50 15 on their cars at stock ride height or close to it.

[Patronus]

I agree, anything 295 will fit. I would also add running 5.5" bs. Most wheels are only avail in a 5". This is very close to the quarter wheel lip. Had I the chance to do over I would recommend the 5.5" and then shim it off the leaf springs if required. 

[Mopar Nut]

I agree, anything 295 will fit. I would also add running 5.5" bs. Most wheels are only avail in a 5". This is very close to the quarter wheel lip. Had I the chance to do over I would recommend the 5.5" and then shim it off the leaf springs if required.  

5.5 would push it more to the wheel lip, you might be thinking of using 4.5.

[HPP]

Moparnut, I think you've got that backwards.  Back space is the amount on the back side of the wheel. Bigger numbers here pull the wheel in closer to the spring.  Smaller number push it out towards the fender lip. The classic '70s highjacker look was because most wheels were offered with 3.5" of backspace. The modern tire tucked into the wheel look comes from backspace number of 6",7", or more.

[JMF]

Would these fit under the rear of a 68 with 295/50/15 tyres ? Backspace 4.00"

http://www.summitracing.com/int/parts/are-615165/overview/

[tan top]

Would these fit under the rear of a 68 with 295/50/15 tyres ? Backspace 4.00"

http://www.summitracing.com/int/parts/are-615165/overview/

no ,  imo  need  5.5 back space  ,  some have 5 inch back space though  ,   best measure your car both sides factory tolerances   car  vary a lot from car to car ,

I thought about  getting that wheel , like the look , sort of a copy of centrelines ,    biggest wheels & tires you can run with the American racing AR61 wheels  is the  8x15 with 3.75 back space  & 235 or 245 or 255 s I for get at all four corners  , with that  back space ,  235 is the best / safest positioning  on wheel / tire  under the wheel well IMO  think I've still got the info written down somewhere when I spent days playing with one of them wheelrite thingys  

[Mopar Nut]

Moparnut, I think you've got that backwards.  Back space is the amount on the back side of the wheel. Bigger numbers here pull the wheel in closer to the spring.  Smaller number push it out towards the fender lip. The classic '70s highjacker look was because most wheels were offered with 3.5" of backspace. The modern tire tucked into the wheel look comes from backspace number of 6",7", or more.

You're right, I did have it backwards, thanks. 

[JMF]

Thanks, i've just started another thread about it, but would my current rear tyres which are 255/60/15, would they work with those wheels if I got 15 x 8, again 4.00" backspace ?

[tan top]

Thanks, i've just started another thread about it, but would my current rear tyres which are 255/60/15, would they work with those wheels if I got 15 x 8, again 4.00" backspace ?

I've got  255 /60 /15   with a 15 x 8 wheel with 4 inch back space on all four corners ,   I wrote a long post sometime ago about my findings & stuff ,  just had a search  , to post link here but cant find it at the minute , think its in battling wheel & tire dilemma thread 

[tan top]

  found it   , have a read of all my posts  here & my findings ,   

http://www.dodgecharger.com/forum/index.php/topic,63191.50.html   

[rockitier350]

thanks guys and thanks for that pictures that is exactly the look I am going for god damn that thing is beautiful what brand tires are those I couldn't make it out also a mini tub is also a option if I find bigger white letter tires . god I love that look

[rockitier350]

also figure I should throw this in the mix I am doing an unlawful triangulated 4 link ( picture I am referring to is that black 69 with the white strip and steelies that thing is bad looking. just looking to get the most rubber to the ground that I can. I found a place that does the o.e.m. steel wheels up to 16x12 but the issue is finding a company and tire with white lettering that big. I mean I love that look

[rockitier350]

thanks for the link tan top

[68X426]

also figure I should throw this in the mix I am doing an unlawful triangulated 4 link ( picture I am referring to is that black 69 with the white strip and steelies that thing is bad looking. just looking to get the most rubber to the ground that I can. I found a place that does the o.e.m. steel wheels up to 16x12 but the issue is finding a company and tire with white lettering that big. I mean I love that look

Most rubber? Coker makes a 445-50-15 that can fit a 12" rim. No white letters, but they could likely customize for you. Good luck making that tire fit however. 295 remains the real world limit.

http://www.cokertire.com/445-50-15-pro-trac-street-pro.html

[jaak]

Here is a pic of a 73 I had with 295/50/15 on the rear. The rear wheels were 15 x 10, I can't remember what the B/S was (I think 4.5, because it needed about another inch) It really bugged me how the rear wheels stuck out past the wheel well a little. The previous owner had just bought the wheels and tires before I bought the car (thats the reason 'Cragers' are on it  )

The front had 235/60/15 on 15 x 8 wheels.



Jason

[rockitier350]

68x426 thanks for the info . I might do a mini tub on it if I can find actual white letter tires those cokers would be perfect if the where white letter.

[myk]

Here is a pic of a 73 I had with 295/50/15 on the rear. The rear wheels were 15 x 10, I can't remember what the B/S was (I think 4.5, because it needed about another inch) It really bugged me how the rear wheels stuck out past the wheel well a little. The previous owner had just bought the wheels and tires before I bought the car (thats the reason 'Cragers' are on it  )

The front had 235/60/15 on 15 x 8 wheels.



Jason

Ew.  Just say no to portruding rear wheels...

[Patronus]

You can re-locate the leaf springs inward for just a few dollar$...
http://www.jegs.com/p/Mopar-Performance/Mopar-Performance-Leaf-Spring-Relocation-Kit/747083/10002/-1

[Bob T]

68x426 thanks for the info . I might do a mini tub on it if I can find actual white letter tires those cokers would be perfect if the where white letter.

Likely you could get a graphics guy to cut some 'Goodyear' flying boot or Dunlop stencils and spray it on yellow or white, lasts a fair while...that's what this local guy did - looks pretty tough for a 318 car eh  

[rockitier350]

bob t that does look sick.

[Patronus]

About to yellow these:

[Bob T]

I'll be looking for a thread on that Patronus    ...since I am partial to black Chargers  

Come to think of it, haven't heard from SFRT for ages 

[hemihead]

Here is a pic of a 73 I had with 295/50/15 on the rear. The rear wheels were 15 x 10, I can't remember what the B/S was (I think 4.5, because it needed about another inch) It really bugged me how the rear wheels stuck out past the wheel well a little. The previous owner had just bought the wheels and tires before I bought the car (thats the reason 'Cragers' are on it  )

The front had 235/60/15 on 15 x 8 wheels.



Jason

Ew.  Just say no to portruding rear wheels...

I have a 73 and I LOVE that look . As for Raised Letters , IMO yellow letters are horrid .