Pictures requested: where to cleanly mount orange ignition box on CHARGER 440

[MackDa600]

Let's see where you guys have them "cleanly" mounted!

[charger490]

i put mine in the glove box so if i want to add nightros i can change my timeing

[myk]

I put mine where the windshield reservoir  used to be; I'll move it once I ge the windshield washer system working again...

[Just 6T9 CHGR]

Let's see where you guys have them "cleanly" mounted!

What ign box?   LOL

[MackDa600]

Just 69, can you send me some close ups? I'm trying to do that but it appears it's going to get hot from engine, and it's also slightly interfering with the oil pressure switch, unless you made your own bracketry?

[A383Wing]

I put mine where the windshield reservoir  used to be; I'll move it once I ge the windshield washer system working again...

Me too

[myk]

I put mine where the windshield reservoir  used to be; I'll move it once I ge the windshield washer system working again...

Me too

Do you not have your windshield washer system working either, or did you relocate the reservoir?

[charger Downunder]

Let's see where you guys have them "cleanly" mounted!

What ign box?   LOL

I have the same bracket set up and never had a problem.

[chargerbr549]

On my 69 Charger I mounted the orange box behind the front license plate then blended the wiring into the headlight wiring harness since its right there plus is gets plenty of airflow and cooler than being in the engine compartment.

Kevin

[A383Wing]

I put mine where the windshield reservoir  used to be; I'll move it once I ge the windshield washer system working again...

Me too

Do you not have your windshield washer system working either, or did you relocate the reservoir?

No reservoir on my black 66 at this time...it broke into many pieces..I need a new one, but that will come later

[69wannabe]

On my 69 Charger I mounted the orange box behind the front license plate then blended the wiring into the headlight wiring harness since its right there plus is gets plenty of airflow and cooler than being in the engine compartment.

Kevin

Thats a cool idea I would have never thought of that. We went to a big mopar show and a guy had mounted his orange box on the bottom side of the battery tray and blended the wiring in from there. That was a cool spot too. Mine is on the firewall since it was a non a/c car there was plenty of room to mount it there!! 

[rave_12000]

I did like just 69 charger...used bracket from later ebody that goes on firewall to get away from heat a bit

[MackDa600]

mounted it on rear of motor. thanks guys!

[tan top]

 just seen this thread , I know you got this sorted now    , just thought would ad this for reference 

heres mine

[Chatt69chgr]

I believe that the bracket that Just69 used to mount his ignition module on the engine was made by a guy in Colorado.  Can't recall the name.  His voltage regulator appears to be mounted to the firewall using a bracket for a 70 B-body available from Bill Rolik Enterprises. 

[Dino]

I can't wait for my Firecore kit so I can get rid of that orange monster.  The po mounted it where the A/C drier is supposed to be.   

[Just 6T9 CHGR]

I believe that the bracket that Just69 used to mount his ignition module on the engine was made by a guy in Colorado.  Can't recall the name.  His voltage regulator appears to be mounted to the firewall using a bracket for a 70 B-body available from Bill Rolik Enterprises.  

Tallzag was the seller.  They now do business as Rocket Resto.

This is the bracket
http://www.rocketresto.com/catalog/electronicignitionbrackets.html