26 spline clutch options

[Baldwinvette77]

Sup peoples, i plan to run a viper 6-speed that has a 26 spline imput shaft, and im having trouble finding a clutch that would work with it and an RB series engine

according to summit, this 2000$ heartattack is my only option http://www.summitracing.com/parts/mcl-4953-00-07/overview/make/dodge 

so um, anything else thats more... practical

or any old school methods that would allow me to run my desired combination 

(a 1971 413 with a 1995 viper t-56)

[A383Wing]

Where is Stu when ya need him?

[John_Kunkel]

If you want an 11" B&B pressure plate you can find them easily

http://www.ebay.com/itm/McLeod-PRESSURE-PLATE-11-B-B-6-CENT-ROLLERS-360206-/280702179899?_trksid=p2054897.l4276#ht_1974wt_800



Then just mate it to a 1 1/8" X 26 disc also readily available.

http://compare.ebay.com/like/321194984027?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar


Same goes if you want 10.5" or diaphragm clutch, the individual parts aren't usually make specific. For what you're doing a Mustang clutch kit would probably work.

[Baldwinvette77]

If you want an 11" B&B pressure plate you can find them easily

http://www.ebay.com/itm/McLeod-PRESSURE-PLATE-11-B-B-6-CENT-ROLLERS-360206-/280702179899?_trksid=p2054897.l4276#ht_1974wt_800



Then just mate it to a 1 1/8" X 26 disc also readily available.

http://compare.ebay.com/like/321194984027?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar


Same goes if you want 10.5" or diaphragm clutch, the individual parts aren't usually make specific. For what you're doing a Mustang clutch kit would probably work.

so essentially what you are saying, is that these parts are more or less, universal? 

[John_Kunkel]

Pretty much.