jack brackets

[poppa]

For a 69 Charger ,what brackets are there for mounting the jack?? I have the one for the spring but is there one somewhere else??

[lukedukem]

I think there's one on the rear inner fender that the end of the jack slides into. Or sits in. And the bottom of the jack does the same. I'm not at car but maybe someone else is. Is that what your after? Or on the jack itself, cause it's just a spring.

Luke

[nvrbdn]

check the thread "junk in your trunk"  it has pictures of the jack in place.

heres the link. good pic of the jack and spring       http://www.dodgecharger.com/forum/index.php/topic,111837.0.html     

[poppa]

Thanks for the replies. I need to know what ,if any , the brackets look like at both ends. The spring part I have covered. Thanks again.

[green69rt]

Here's two of the brackets and maybe just the edge of the one on top of the wheel well.  You can get  full set from AMD.

http://www.autometaldirect.com/amd-68-70-charger-jack-bracket-3pc-set-p-5025.html

[tsmithae]

Here are the 2 brackets in question.  Let me know if you need/want measurements as I have those as well.   

[poppa]

Perfect guys. Thanks. I have seen the bottom one ,is the top one repo'd too??

[lukedukem]

Perfect guys. Thanks. I have seen the bottom one ,is the top one repo'd too??

yes. they come as a set from AMD. the link that green69rt posted has the set.

Here's two of the brackets and maybe just the edge of the one on top of the wheel well.  You can get  full set from AMD.

http://www.autometaldirect.com/amd-68-70-charger-jack-bracket-3pc-set-p-5025.html

luke