News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

parts

Started by el dub, September 11, 2013, 06:18:04 PM

Previous topic - Next topic

el dub

Going thru my parts and don't know what these are. Especially the little plastic piece on bottom left. Do I need 2of those?  Do the v shaped pieces go under the roof trim?  thanks.   lw

entia non sunt multiplicanda praeter necessitatem

el dub

A couple of more parts. Do these have something to do with the check molding. thanks.  lw
entia non sunt multiplicanda praeter necessitatem

green69rt

Quote from: el dub on September 14, 2013, 01:40:21 PM
A couple of more parts. Do these have something to do with the check molding. thanks.  lw
These are little tabs that connect the A-piller moulding to the lower windshield molding at the lower corners.  Someone might have a better pic of the installation.

twodko

The hinge with the spring is off the inside door handle of 2nd gens.
FLY NAVY/Marine Corps or take the bus!

el dub

Thanks you two, I'm baggin and taggin now till the car gets painted. lw
entia non sunt multiplicanda praeter necessitatem

el dub

Here are the 2 pieces snapped together, does this help to ID.
entia non sunt multiplicanda praeter necessitatem

tan top

Quote from: el dub on September 24, 2013, 10:26:35 AM
Here are the 2 pieces snapped together, does this help to ID.

there is nothing like that on a second generation
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

twodko

Quote from: el dub on September 24, 2013, 10:26:35 AM
Here are the 2 pieces snapped together, does this help to ID.
[/


I found parts that just made no sense until I asked around this site myself. This place is the smithsonian of MOPAR knowledge.
FLY NAVY/Marine Corps or take the bus!

el dub

Thanks Tan Top for the reply. I got beat on a paint job but the guy at least brought back my parts he took off to paint the car. Only problem is I don't know where they all go. Twodko, glad to hear that, I'm going to need those experts to help me out in the future. Especially when I get the car back from the paint shop. I've got all kinds of pieces that go in the doors and windows that I am sure I will need help on. That guy Shakey has some pretty good pics that will help. Thanks    lw
entia non sunt multiplicanda praeter necessitatem

tan top

Quote from: el dub on September 24, 2013, 02:20:40 PM
Thanks Tan Top for the reply. I got beat on a paint job but the guy at least brought back my parts he took off to paint the car. Only problem is I don't know where they all go. Twodko, glad to hear that, I'm going to need those experts to help me out in the future. Especially when I get the car back from the paint shop. I've got all kinds of pieces that go in the doors and windows that I am sure I will need help on. That guy Shakey has some pretty good pics that will help. Thanks    lw

:cheers:   any other parts your not sure ! what goes where !!  , post a picture up , & we will all  have a look &  figure out where it goes

:yesnod: :2thumbs:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

el dub

You asked for it.  :icon_smile_big:  I'm just getting started.
entia non sunt multiplicanda praeter necessitatem

el dub

You asked for it.  :icon_smile_big:  I'm just getting started. These clips must hold 2 pieces together kind of like the door rod mechanisms but they are a little bigger.
entia non sunt multiplicanda praeter necessitatem

cdr

the 2 clips clip on the rear 1/4 at the bottom of the side glass to hold on the belt molding.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

el dub

Thanks cdr, I'm not quite following what you mean cuz my cars not here. But at least I've got an idea where to look in the service manual.  lw
entia non sunt multiplicanda praeter necessitatem

cdr

IN the same area as the outer window fuzzie
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

el dub

That narrows it down, thanks cdr.
entia non sunt multiplicanda praeter necessitatem

tan top

Quote from: el dub on September 28, 2013, 05:27:40 PM
You asked for it.  :icon_smile_big:  I'm just getting started.

nothing like that on a second generation as far as I know ,
I striped my 69 down to the last nut & bolt & clip ,& had nothing like that !! , it looks sort of familiar though  :scratchchin:


Quote from: cdr on September 30, 2013, 07:31:03 AM
IN the same area as the outer window fuzzie


:2thumbs: :2thumbs: :coolgleamA:

there are three each side ,  although the factory put 4 round holes in the body each side  :scratchchin: ,
 see green arrows in picture below  :yesnod:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

cdr

TANTOP ,,you are always VERY helpful ,I.E. pictures & knowledge!!!! you have been VERY helpful to DC.COM.     :yesnod:
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

tan top

Quote from: cdr on October 06, 2013, 12:40:50 PM
TANTOP ,,you are always VERY helpful ,I.E. pictures & knowledge!!!! you have been VERY helpful to DC.COM.     :yesnod:

thanks buddy , Appreciated  :cheers: :2thumbs: 

  , glad to help if I can ! &  / talk / look at
charger / mopar stuff on here , with my fellow mopar brothers on DC.com   :cheers:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

el dub

Thanks Tan Top, I've only found 2 of these clips so far.
entia non sunt multiplicanda praeter necessitatem

el dub

Quote from: tan top on October 06, 2013, 12:19:23 PM
Quote from: el dub on September 28, 2013, 05:27:40 PM
You asked for it.  :icon_smile_big:  I'm just getting started.

nothing like that on a second generation as far as I know ,
I striped my 69 down to the last nut & bolt & clip ,& had nothing like that !! , it looks sort of familiar though  :scratchchin:


Quote from: cdr on September 30, 2013, 07:31:03 AM
IN the same area as the outer window fuzzie


:2thumbs: :2thumbs: :coolgleamA:

there are three each side ,  although the factory put 4 round holes in the body each side  :scratchchin: ,
 see green arrows in picture below  :yesnod:

Do any of you know where I can get these clips?  Are these clips on 66-67 chargers? I know where a couple of those are.
entia non sunt multiplicanda praeter necessitatem

Troy

Quote from: el dub on September 14, 2013, 01:40:21 PM
A couple of more parts. Do these have something to do with the check molding. thanks.  lw
Those are for the lower front window trim. The screw in at the bottom of the A pillar.

Troy
Sarcasm detector, that's a real good invention.

el dub

entia non sunt multiplicanda praeter necessitatem