Trac lock

[fy469rtse]

Can you buy 8 3/4 traclock centre, I think it was made by Yukon , good second hand units have dried up,
Does any one know where to source

[Chryco Psycho]

I would look at the Eaton Tru Trac

[elacruze]

I would look at the Eaton Tru Trac

\\

+1

[firefighter3931]

Can you buy 8 3/4 traclock centre, I think it was made by Yukon , good second hand units have dried up,
Does any one know where to source

You planning to race the car with sticky tires ? If so, it's Dana time 

The 8 3/4 won't last long behind a stroker that hooks 


Ron

[metallicareload99]

I would look at the Eaton Tru Trac

\\

+1

Can you buy 8 3/4 traclock centre, I think it was made by Yukon , good second hand units have dried up,
Does any one know where to source

You planning to race the car with sticky tires ? If so, it's Dana time 

The 8 3/4 won't last long behind a stroker that hooks 


Ron

1 + 1

[chargerbr549]

Check out Dr Diff

[fy469rtse]

Thanks Ron, yes going to race mine very occassionally , very few race tracks left over here and too far to travel to, trac lock , housing braced, this is for a friends charger , warm 440 , hoping I don't hurt it or it will end up with a Dana, also thanks guys for the help

[firefighter3931]

Thanks Ron, yes going to race mine very occassionally , very few race tracks left over here and too far to travel to, trac lock , housing braced, this is for a friends charger , warm 440 , hoping I don't hurt it or it will end up with a Dana, also thanks guys for the help

So if this question pertains to your buddy's charger with a "warmed" 440 then the tru-trac will work fine.  The tru-trac is not recommended for high horsepower & racing. 

If you're planning to keep the 8.75 in your car behind the stroker I would recommend a detroit locker with aftermarket axles and a back brace....at a minimum. 

Fwiw I installed the Detroit locker in my Dana with 35 spline Strange axles and it drives perfectly fine on the street....no weird noises or ratcheting around corners etc...


Ron

[fy469rtse]

I hope your wrong Ron, and I don't break this, been a good rear end so far, the 68 and a previous 69 had  83/4's , I gave them a good workout, weak link was always the auto's and blown a few up violently,  I think we are similar, people can't believe that I drive my cars like I do, best part we have access to dana's here, the rams are very popular in the mining industry,