News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Coat hanger thingy - where does it go?

Started by bull, August 30, 2013, 04:36:18 PM

Previous topic - Next topic

bull

Was there just one of these things or two? I'm thinking there was just one on the passenger side about where the back of the door is? :shruggy:

cdr

mine had 1,it goes next to the snap for the shoulder belt,if you need a pic let me know
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

bull

I don't/didn't have any shoulder belts. Is yours on the passenger side?

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Mopar Nut

"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

moparnut

My 69 has two ,one on each side.  moparnut

70 sublime

next project 70 Charger FJ5 green

bull

Only one hook in 68? :shruggy: I've only got one to install but that doesn't mean anything.

JB400

I guess I'll be in the market for a pair. :popcrn:

tan top

 I always assumed there was  one each side , on all chargers  :scratchchin:    mine has  :yesnod:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Brock Lee


Fred



Tomorrow is promised to no one.......drive your Charger today.

A383Wing

Both my 66's have 2, I know a lot of 67's that only came with one, and I didn't put the shoulder belts or the coat hooks back in the 70 when we turned it into the pointy purple car

Bryan

Dino

2 here on my 69.  Did we find another difference between same gen models?
Extraordinary claims require extraordinary evidence.

green69rt

I remember my old 69 had one on each side.  I used them to hang a clothes bar across the back seat when my wife and I were driving cross country.

Nacho-RT74

having one, the provision should be still there for the second I guess
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

bull


cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

bull

Quote from: cdr on September 01, 2013, 06:33:09 PM
Quote from: bull on September 01, 2013, 05:18:04 PM
Ahhhhhh! :brickwall: :brickwall: :brickwall:

?

1 or 2. :shruggy: I swear, other than screwing the antenna mast on not one single part of this restoration has been simple. Complexity and ambiguity at every turn.

Nacho-RT74

dunno if you got what I meant, but just in case I want to get it cleared. I don't think you get two diff roof frames for one or 2 coat hanger cars, it must be just about dealer options. Being the same roof FOR ALL CARS, even getting just one hanger on one side, THE PROVISION on roof must be there for the other side. If you want to add it on, go for it!

Is like adding extra electrical accesories. My car didn't came originally with lights on warning buzzer option, BUT the plug was there on underdash harness ready to plug it on getting the parts for the option ( buzzer and extra harness )... and I did it, when it was wired like 71s ( 74 Chargers in Venezuela were wired something like 71s )

When I become my car on a full 74 USA version, with 74 underdash harness and everything, the option was added simply changing the buzzer from the just seatbelt and ign key function to the FULL WARNING BUZZERS option... no even need to add wiring. The existant plug accepts both buzzer setups.

so in your case it must be just about options sold, but provisions must be there for any kind of option available on our cars.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

bull

That is true I'm sure. There is probably two spots for hangers on all of them but I would think there would have been some uniformity as to how many were actually installed. That said I doubt this was a dealer option thing. I dunno, maybe it was. :shruggy:

tan top

  had a flash back , reading this thread again  , seem to remember reading something about the new 68 charger , & going through options & standard equipment  ,  pretty sure the  word soft coat hooks was mentioned , think this was in a sales brochure  or Ad , think it was comparing a 67 to the new 68 ,  :scratchchin:, not sure its something I have in my collection of mopar stuff or something ive read on line , like a picture of a dealer brochure  , 
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

A383Wing

66 & 67 coat hooks were both chrome metal, different design for each year...I'm unsure as to the type of material used in the 68's

bull