magnum 360 camshaft

[cowboy4x4n]

guys I need help with a cam.  I just bought a 2001 magnum 360 and a518 trans for the 69.  I am looking around for a roller cam for this car and need help finding a company that offers a cam with the option to run a manual fuel pump. the ones I have found seem to be only for an electric set up.  any ideas what company to go to and what cam to use.  gearing will be 355 and I want to use the stock lock up convertor

thanks

[Troy]

I am not a cam expert but I'll tell you what I do know...

That Magnum is already a roller cam (not sure if you knew that) so that should be easy - just buy a cam for a Magnum. What you need is to order a cam with the extended "snout" for the fuel pump (Comp and Crower carry these for sure) OR you can order a Hughes bolt on cam extender and eccentric (also at Summit).

You'll need to switch the front cover to an LA style in order to have a place to mount the pump (and the room to install the longer cam). When you make this change you also need to switch to LA style pulleys, belts, and accessories.

Troy

[cowboy4x4n]

Oh awsome thanks man ill check that out

[chargd72]

I have a 360 roller cam out of a 96 2500 if you're looking for one on the cheap. 

[cowboy4x4n]

oh I still have the stock cam out of the 01 motor I was looking to rebuild this motor well beyond stock

[chargd72]

Gotchya.  Keep us in the loop with the build.  I'm going to be building off a magnum block too so any tips will be helpful.

[cowboy4x4n]

will do.  I gave comp cams a call they recommended a custom grind for what I described I wanted.