News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Interior dash n door pads

Started by dodge604charger, July 27, 2013, 10:30:30 AM

Previous topic - Next topic

dodge604charger

Anyone recently have any good luck with their dash pads n upper door pads for their 68-70 b body from any of the companys out there. Dont wanna break the bank by using just dashes if i dont have to. Thanks

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

440

BE&A's dash pad fits well and looks great, not too expensive in my opinion. Their door pads look great and from what I've read they fit well. I bought a set of BE&A's 69 door pads but someone converted my doors over to 68 locks so I cant use them, $400 down the drain   :brickwall:  That's the only problem, repro door pads are too expensive.

You'll lose the original stitching if you have the lower dash pads re-skinned. If your pads aren't too bad I'd get them fixed up, any GOOD interior shop should be able to make the repairs unnoticable.

dodge604charger

Thanks guys. I'll check them out..