News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Radiator Flush questions

Started by bakerhillpins, July 16, 2013, 01:48:25 PM

Previous topic - Next topic

bakerhillpins

All,

So I suspect that I have done this in the wrong order but none the less this is where I am. I have a bit of an overheating issue and I have just been dealing with it. When temps get into the 90s (not frequent here in NH) I have problems in slow/stop and go traffic (again not to common in the woods where I live). But in the interest of getting the car running well enough to make Carlisle next year I pulled the rad to get it cleaned out. Once I got it out and saw that the lower inner was banged up a bit I opted to just have the thing re-cored for $500 rather than burning $90 on the boil as a "lets see what happens".

So now I have a shiny new rad and I realized I should probably flush the system before I put it in and proceed to ruin my investment. Searches seem to discuss running the engine combined with a few fill and drain cycles. Since I don't really want to put the new rad in right away I was looking for feedback on options and how tos.

I was thinking I could pull the thermostat and push water from a hose through the block and out? Or even buy some vinyl tubing and just bypass the rad completely for the flush ops. Should I run a flush agent through the system? I read that CLR (as seen on TV) or vinegar work as cleaners?

Oh, and I am mid stream on a carb rebuild so I can't really run the engine yet. Oh, and my heater controls don't work. Do I need to turn on the heater??? I thought it always passed coolant through the heater core and the controls only control the air flow?

Thanks.
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

ODZKing

I would be interested in this thread as I would like to do a clean-out myself. Not as easy as going to the chinees restaurant ... if you know what I mean.   :D
I did have several people tell me this: if you flush the system the wrong direction through the heater core, and the core is old, possibly on it last breath - going the wrong way will end it. Not sure how much truth in it but that is what I'd heard.   :popcrn:

ws23rt

Quote from: ODZKing on July 16, 2013, 02:01:44 PM
I would be interested in this thread as I would like to do a clean-out myself. Not as easy as going to the chinees restaurant ... if you know what I mean.   :D
I did have several people tell me this: if you flush the system the wrong direction through the heater core, and the core is old, possibly on it last breath - going the wrong way will end it. Not sure how much truth in it but that is what I'd heard.   :popcrn:

I  remember hearing the same thing  somewhere.  So my thinking is what possible problem could come from a back flow? All I can come up with is a possible loosening of crud that could block some small passages in the core.
If that disturbance is enough to cause significant blockage or leaking than the heater core can fail at any time anyway. It would be good to find this out at home rather than on the road.
My further thinking on this is that the reason for flushing to begin with is to remove as much crud as possible and it feels like a back flow would do a better job.
I would however try to flush the heater core by itself and not subject it to the possible core blocking crud from the engine.

cudaken

 What happens when you flush / hot tank a radiator is you wash out calcium and crude that is acting like stop leak. I owned a radiator company at one point in my life.

When we hot tanked we would pressure test the radiator in water and would sometime see fine streams of bubbles. We called them smokers. if there was only 5 or 6, we would solder them up at no cost.

Far as why back flushing causing a problem, I don't see why?  :shruggy: Maybe because it gets more crap and and exposes the fine holes there where filled with crud?

Cuda Ken 
I am back

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

ws23rt

Quote from: cudaken on July 16, 2013, 11:11:15 PM
What happens when you flush / hot tank a radiator is you wash out calcium and crude that is acting like stop leak. I owned a radiator company at one point in my life.

When we hot tanked we would pressure test the radiator in water and would sometime see fine streams of bubbles. We called them smokers. if there was only 5 or 6, we would solder them up at no cost.

Far as why back flushing causing a problem, I don't see why?  :shruggy: Maybe because it gets more crap and and exposes the fine holes there where filled with crud?

Cuda Ken 


Glad to hear from someone that was in the business. I suspect back flushing as being trouble is a myth that grew from a few problems that were misdiagnosed and word of mouth made them seem real.
The late 60s--early 80s were a time of "high" myth generation.

Bobs69

I used vinegar on mine and wow.  I had a hard time getting the antifreeze to stay green after that. 

bakerhillpins

Quote from: ws23rt on July 16, 2013, 07:29:35 PM
If that disturbance is enough to cause significant blockage or leaking than the heater core can fail at any time anyway. It would be good to find this out at home rather than on the road.

I'm with you on that. I have to pull the heater box this fall anyhow to rebuild it.
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

bakerhillpins

Quote from: Bobs69 on July 17, 2013, 12:03:50 AM
I used vinegar on mine and wow.  I had a hard time getting the antifreeze to stay green after that. 

Wow, like BAD I take it?  Could you elaborate on what you did and how long the resolution took?
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

Dino

Bryan make sure you remove the plugs on the engine block.  It's probably all crud in there so you may have to poke it to get the coolant out. 

I thought about cleaning minee by having the engine running and sticking a hose in the top but before I did I figured it wouldn't hurt to put the garden hose in the top hose of the rad and guided the bottom hose into a container.  I let the water run untill the container was full an dby that time it was already nice and clear.  Give it a shot and see what comes out.

Your heating issue is very strange.  My 440 is a little hotter than yours and I can't get it over 180, not even stucm in traffic on a 90+ day.  Have you tried another water pump?
Extraordinary claims require extraordinary evidence.

bakerhillpins

Dirk,

Are you talking about the freeze plugs??  If not what where are they?   :scratchchin: (yes being too lazy to look in FSM now). I already had the Rad re-cored so it's done, clean, new and the fins are not all bent to heck.

When I drained the Rad before I pulled it the antifreeze came out all nice and clean. Then I pulled the Rad out and tipped it upside down to get the last of the coolant out and it looked like Hershey's Syrup.  :eek2:

It's a stock pump and a clutched fan. The fan looks to be new as it's all shiny. I picked up a new fan shroud at Carlisle as the old was "missing" on the top arch. I can pull the pump but I don't see any reason to change per the sticky thread at the top of this section.
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

Dino

Quote from: bakerhillpins on July 17, 2013, 06:56:30 AM
Dirk,

Are you talking about the freeze plugs??  If not what where are they?   :scratchchin: (yes being too lazy to look in FSM now). I already had the Rad re-cored so it's done, clean, new and the fins are not all bent to heck.

When I drained the Rad before I pulled it the antifreeze came out all nice and clean. Then I pulled the Rad out and tipped it upside down to get the last of the coolant out and it looked like Hershey's Syrup.  :eek2:

It's a stock pump and a clutched fan. The fan looks to be new as it's all shiny. I picked up a new fan shroud at Carlisle as the old was "missing" on the top arch. I can pull the pump but I don't see any reason to change per the sticky thread at the top of this section.

Yes freeze plugs!  I hadn't had much coffee yet.   :icon_smile_big:

Stock pump should work fine but I would still remove it to check it out.  Also replace the $5 thermostat while you're doing so.  You have the good pump but for all we know the pump is damaged.

How long does it take for your engine to get up to normal operating temps?  Around the 180 mark?  Mine takes about 10 minutes of crusing betwen 35 - 60.
Extraordinary claims require extraordinary evidence.

bakerhillpins

Ok, ill need to order/pickup the gasket for it then.  The thermostat seems to work just fine. When not in traffic I get a nice steady 180 (indicated anyhow) temp so I figured it's a capacity not thermostat issue.

Ill admit that I never really paid attention to initial warmup. It was only in traffic that I was watching anything. I would say that it heats up rather slowly (your quoted values seem reasonable) but it's not all that hot in the woods.  :icon_smile_big:
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

Dino

Seems to me the temps are fine as long as you're moving but not when you're stopped.  I want to say the fan/clutch is the issue here.  Either it's not kicking in when it's supposed to or the fan is not sufficient.  I thought you had the stock fan?  Is your timing set properly by the way?  One or two people have been telling me lately that may be an important thing to do.   :icon_smile_big:

Also, are you reading temp off of the stock gauge?  Any chance you can borrow a more reliable one for testing purposes?  For all we know the car is fine but the gauge is telling you lies.  Wouldn't be the first.


Extraordinary claims require extraordinary evidence.

bakerhillpins

No, I can take stop and go traffic at cooler temps and it seems to idle just fine in the driveway without overheating.  The fan spins, but I don't have any way to quantify "sufficient" from a cooling perspective. According to the FSM I do have a stock setup for a 69 440 AC Auto car. Though it wouldn't be the first time I read it incorrectly.

I also have a bit of heat soak. Which I always assumed was caused because the cars capacity to cool is being stressed.  :shruggy: Forgot to mention that.  :slap:

The timing should be set properly. I paid for that service when I first got the car. I will be checking all this when I get the carb fiasco completed and pick up a light.

Yes, temps off the stock gauge. Which is steady most cases but climbs in hot weather and slow traffic.
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

440

I've never had a problem with back flushing a system. The only time you can run into trouble is by using too much pressure, you definately want to turn the heater on as to flush it as well. I wouldn't use a cleaning agent unless you know there is a bit of gunk in the system. Be prepared for leaks as the crap in there could be sealing small holes.

Bobs69

Quote from: bakerhillpins on July 17, 2013, 06:35:47 AM
Quote from: Bobs69 on July 17, 2013, 12:03:50 AM
I used vinegar on mine and wow.  I had a hard time getting the antifreeze to stay green after that. 

Wow, like BAD I take it?  Could you elaborate on what you did and how long the resolution took?

I just kept changing and flushing with straight water.  Then a couple of flushes with antifreeze. 

A mechanic told me I could have used a "dye pack."

tan top

, any cooling system i do , i always reverse flush the heater core with a hose till it runs clear  as a separate unit ,  then by pass it , carry on what ever way your doing the motor ,  when finished with the motor getting it as good as you can  , then  connect  heater core back up
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

ws23rt

Quote from: tan top on July 18, 2013, 06:25:44 PM
, any cooling system i do , i always reverse flush the heater core with a hose till it runs clear  as a separate unit ,  then by pass it , carry on what ever way your doing the motor ,  when finished with the motor getting it as good as you can  , then  connect  heater core back up


I agree :2thumbs:  It would be best to flush the heater core by itself. The engine block can have large pieces of crud and they could block some small passages in the heater core.
If I was flushing the engine I would not push that flow through the radiator. The same for the heater core.

tan top

Quote from: ws23rt on July 18, 2013, 06:56:45 PM
Quote from: tan top on July 18, 2013, 06:25:44 PM
, any cooling system i do , i always reverse flush the heater core with a hose till it runs clear  as a separate unit ,  then by pass it , carry on what ever way your doing the motor ,  when finished with the motor getting it as good as you can  , then  connect  heater core back up


I agree :2thumbs:  It would be best to flush the heater core by itself. The engine block can have large pieces of crud and they could block some small passages in the heater core.
If I was flushing the engine I would not push that flow through the radiator. The same for the heater core.


 true :yesnod: :2thumbs:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Cooter

Gentlemen, once a cooling system gets that brown, Muddy, all but solid River bottom sh*t in it, there's no amount of flushing that will help that engine. As soon as you shut down the engine and it cools, that mud begins to collect at the bottoms of the cooling jackets, Radiators tank, heater core, etc. See, once coolant is left in a system for say 8-10 years, and you send an electrical current through it enough times (Remember that badass MSD ignition you have? Where do you think the ground for it is????), it breaks the coolant down to an acid base and it begins to eat EVERYTHING. Yes, and old heater core/radiator. intake gasket[Small blocks only]/etc. will begin to leak if you clean it all out as many times, that sh*t in there is the only thing holding the cooling system together.


Flushing a cooling system after some dumbass has let it turn to mud is like smoking cigs for 35 years, and THEN trying to get healthy by running a marathon.


Too little, too late.

I have had engine blocks HOT TANKED and had to still use a 2500 PSI pressure washer aimed DIRECTLY at the coolant jackets in order to blast that crap out....
No water hose, flush in can, etc. will EVER do what 2500 PSI will.
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

tan top

Quote from: Cooter on July 18, 2013, 07:04:41 PM
Gentlemen, once a cooling system gets that brown, Muddy, all but solid River bottom sh*t in it, there's no amount of flushing that will help that engine. As soon as you shut down the engine and it cools, that mud begins to collect at the bottoms of the cooling jackets, Radiators tank, heater core, etc. See, once coolant is left in a system for say 8-10 years, and you send an electrical current through it enough times (Remember that badass MSD ignition you have? Where do you think the ground for it is????), it breaks the coolant down to an acid base and it begins to eat EVERYTHING. Yes, and old heater core/radiator. intake gasket[Small blocks only]/etc. will begin to leak if you clean it all out as many times, that sh*t in there is the only thing holding the cooling system together.


Flushing a cooling system after some dumbass has let it turn to mud is like smoking cigs for 35 years, and THEN trying to get healthy by running a marathon.


Too little, too late.

I have had engine blocks HOT TANKED and had to still use a 2500 PSI pressure washer aimed DIRECTLY at the coolant jackets in order to blast that crap out....
No water hose, flush in can, etc. will EVER do what 2500 PSI will.


thats true too !!
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Brightyellow69rtse

go with a high flow thermostat too. if your going to replace the pump go high flow for sure  :2thumbs:

ws23rt

Quote from: Cooter on July 18, 2013, 07:04:41 PM
Gentlemen, once a cooling system gets that brown, Muddy, all but solid River bottom sh*t in it, there's no amount of flushing that will help that engine. As soon as you shut down the engine and it cools, that mud begins to collect at the bottoms of the cooling jackets, Radiators tank, heater core, etc. See, once coolant is left in a system for say 8-10 years, and you send an electrical current through it enough times (Remember that badass MSD ignition you have? Where do you think the ground for it is????), it breaks the coolant down to an acid base and it begins to eat EVERYTHING. Yes, and old heater core/radiator. intake gasket[Small blocks only]/etc. will begin to leak if you clean it all out as many times, that sh*t in there is the only thing holding the cooling system together.


Flushing a cooling system after some dumbass has let it turn to mud is like smoking cigs for 35 years, and THEN trying to get healthy by running a marathon.


Too little, too late.

I have had engine blocks HOT TANKED and had to still use a 2500 PSI pressure washer aimed DIRECTLY at the coolant jackets in order to blast that crap out....
No water hose, flush in can, etc. will EVER do what 2500 PSI will.


I agree with you on this also. What we can see in the engine when the freeze plugs are out is depressing. Cleaning as best we can at that point only gets to what the water jet can see. We know there is much left untouched by the pressure cleaning and little can be done for that.
It is true that at home flushing is at best removing what is floating around already. If one was anal about this a colon scope would show more about what we can do little about.  :eek2:
For the bulk of us at home maintenance types a flush is good when the coolant looks muddy.
As far as adding some chemical to break up stuff we can't see and don't have a problem with in the first place. It seems like asking for trouble.
Out of sight--out of mind---No over heating problem?---move on.

bakerhillpins

Dug through some of the FSM last night and they suggest flushing the heater core separate from the block and the block separate from the radiator itself. So that means that getting the rad fixed up first wasn't an issue.

Also suggests to reverse flush the core and block.  Couldn't find anything that specificaly stated that the heater needs to be on though. I suppose it will be obvious if water doesn't flow. :shruggy:

I'm flushing since the rad is new. I don't think the block has been treated that bad cooter.  

One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.