Bolt on exhaust

[Silver R/T]

Does anyone sell bolt on mandrel bent exhaust for 68 Charger? Something that I could put on myself at home. I'm looking at either s/s or aluminized.

[Mopar Nut]

TTi - XB25MN6870-SS

I special ordered mine in 2.5" 304 stainless steel from them. It's stainless steel from the exhaust manifolds to the tips.

[bill440rt]

TTI aluminized here. Easy bolt in at home, lying on a creeper.
Several other companies are out there as well besides TTI selling bolt-on exhausts.

[Silver R/T]

TTi - XB25MN6870-SS

I special ordered mine in 2.5" 304 stainless steel from them. It's stainless steel from the exhaust manifolds to the tips.

I have headers with 3" primaries so I'd need 3" into 2.5" reducers. And I'd like X-pipe version, do they have something like that?

[Mopar Nut]

TTi - XB25MN6870-SS

I special ordered mine in 2.5" 304 stainless steel from them. It's stainless steel from the exhaust manifolds to the tips.

I have headers with 3" primaries so I'd need 3" into 2.5" reducers. And I'd like X-pipe version, do they have something like that?

Yes, that's what I have is the X-pipe version without the headers. You can also have them custom bend your exhaust in 3" SS for a little more (XB30MN6870-SS). Do you have long or short headers?

[Silver R/T]

They are Doug Thorley 2" primaries 3" collector headers, not sure if they're long or short version.

[bill440rt]

Same here.
TTI headers with 3" collectors, into 2.5" exhaust with an X-pipe.
Pricey yes, but worth it.

http://www.ttiexhaust.com/

[Mopar Nut]

They are Doug Thorley 2" primaries 3" collector headers, not sure if they're long or short version.

Sounds like those are the long version. If you order the exhaust from TTi, let them know what headers you have.

[tan top]

TTI aluminized here. Easy bolt in at home, lying on a creeper.
Several other companies are out there as well besides TTI selling bolt-on exhausts.

same here TTi aluminized  , 3" system with H pipe ,  went for H pipe as did not like the look of a X pipe  

TTi - XB25MN6870-SS

I special ordered mine in 2.5" 304 stainless steel from them. It's stainless steel from the exhaust manifolds to the tips.

never knew you could get them in stainless steel ,    althought not checked their site for a while & was 10ish  years since i fitted mine may be longer 

[Mopar Nut]

TTi - XB25MN6870-SS

I special ordered mine in 2.5" 304 stainless steel from them. It's stainless steel from the exhaust manifolds to the tips.

never knew you could get them in stainless steel ,    althought not checked their site for a while & was 10ish  years since i fitted mine may be longer  

I called TTi last October wanting to know if they could bend stainless down pipes. Then I asked about bending a X-pipe out of stainless, next thing I was ordering a whole system. I spoke to Mike Raby at 951-371-4878.

[Silver R/T]

how good are those mufflers that TTI offers as package with their exhaust systems?