News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Master cyl reservoir-front or back?

Started by Dodgerdallas, June 22, 2013, 02:43:02 PM

Previous topic - Next topic

Dodgerdallas

Took the single line Cardone master cyl off and I'm putting on a dual cyl from a 72 charger for my new front disks,which reservoir goes to the fronts,the small or large? It's a standard brake master cyl...
This is gonna be cheap and easy......

A383Wing

large reservoir goes to front disc's....yer gonna need to put proportioning valve in as well

Bryan

Dodgerdallas

Oh yeah,I've got a nice Willwood unit for it plus a residual valve for the rear-thanks
This is gonna be cheap and easy......

Ghoste

Your disc calipers need a larger fluid capacity to move them than your drum wheel cylinders is the reason.

Dodgerdallas

Cool,this is my first changeover the drums I could never get straight,they grabbed bad-I could only get them to grab less (that's as good as it ever got) everything was new front to back even the lines and had them bled and adjusted by a shop that charged me 99.00 just to bleed them but I mortgaged my house (lol) and I've got a 440 on the stand and an entire 4sp setup from Brewers arriving Tuesday so ill need the disks
This is gonna be cheap and easy......