front stainless brake line routing

[fireguyfire]

Hey guys; I put a wilwood front disc system on my 68 charger during my full restoration, and I am now buttoning down the final details with the car up on axle stands still.
My question is, what is the best way to route the stainless line from the caliper (front mounted calipers, and will put the connection to the hose on the inside lowest bleeder, or inside front on the front mounted caliper if that makes sense?). I am curious if I should route it under the lower control arm, between the upper and lower control arm, or above the upper control arm.
Any suggestions/photos from someone who has done this?