What does 1,500 buy you for a 69 charger?

[spoolinhard]

Will post pics here tomorrow evening when I get it home!

[XS29L9Bxxxxxx]

looking forward to the answer 

[twodko]

My new disc brake conversion!

[JB400]

Time for a Pepsi


My guess, a set of quarter panels or a set of heads

[TexasGeneral]

A carburetor!

[A383Wing]

A tank of gas, then new tires from burning them off with that tank of gas

Bryan

[Patronus]

One half of something 

[hatersaurusrex]

OEM wiper blade inserts?

[A383Wing]

maybe a factory locking gas cap or stock bumper jack? 

[68X426]

    Rust.

     

[WHITE AND RED 69]

A used grill?   

[Bob T]

A 2nd hand blower  

or maybe, an 833 and pedal box and some other parts??

[1974dodgecharger]

I see...... 

[tan top]

        

[Cooter]

Certainly NOT a Crispy '68 Hemi Charger....

[skip68]

I'm gonna say a pretty much complete 69 Charger that needs a lot of work.   

[ACUDANUT]

 

[moparstuart]

I'm gonna say a pretty much complete 69 Charger that needs a lot of work.   

can you send me 10 of them   

[Baldwinvette77]

a 69 charger? 

[chargd72]

Headlight doors.

[Mopar Nut]

One of those blow up girlfriends so you can drive it in the HOV lanes.

[bakerhillpins]

One of those blow up girlfriends so you can drive it in the HOV lanes.

[Old Moparz]

Hmm, $1500 got me my Charger & I still had $400 leftover for beer.   

You could probably set yourself up with wheels & tires for $1500.

[BrianShaughnessy]

Hmm, $1500 got me my Charger & I still had $400 leftover for beer.   

You could probably set yourself up with wheels & tires for $1500.

He's talking about in this century Bob... 

[69charger2002]

$1500 buys you... a nice set of wheels and tires.. 

[spoolinhard]

Ooooh, this is going to be good!

[skip68]

Is it bigger than a bread box?   

[70moparman]

A grill or a 440HP motor needing rebuilt... Perhaps a rusty carcus drug out of the woods where it has been sitting since 71, and will need every single part repaired or replaced, with no title...

[moparstuart]

Hmm, $1500 got me my Charger & I still had $400 leftover for beer.   

You could probably set yourself up with wheels & tires for $1500.

He's talking about in this century Bob... 

Bob's not sure what this century is 

[JB400]

If this was Hangman, where would we be at? 

[GOTWING]

nos tach/clock, 

[Mytur Binsdirti]

Ooooh, this is going to be good!

With this build up, it better be.

[Old Moparz]

Hmm, $1500 got me my Charger & I still had $400 leftover for beer.  

You could probably set yourself up with wheels & tires for $1500.

He's talking about in this century Bob...  

Bob's not sure what this century is  

I do know what century it is & I got my Charger in it, too.  


I got the Charger in 2003, many years after my wife & I got married, by the way.

[Dave27]

Heres what you get for 5,000

[moparstuart]

Heres what you get for 5,000

ok where do i send the money 

[A383Wing]

If this was Hangman, where would we be at? 

dead, buried, in the ground

[Dave27]

Heres what you get for 5,000

ok where do i send the money 

LOL sorry not for sale I just picked her up a few weeks ago. I need fenders a hood and a core support.Anyone want the old fiberglass tilt nose.

[Budnicks]

    Rust.

     

yeah probably ILMAO there are some deals out there every once in a blue moon tho...

[Budnicks]

Ooooh, this is going to be good!

With this build up, it better be.

Amen brother...    

[greenpigs]

Something without a title, but in better shape than the money implies.

[cudaken]

NOS windshield wiper arms and motor? 

Left over Dukes Of Hazard Remains? 

[spoolinhard]

Well it didnt come out of the woods and it has a title

[JB400]

I guess you can never have too many irons in the fire

What's the analysis on this jewel and the plans for it?

[spoolinhard]

This is going to replace the super crusty 70 I bought not that long ago. So, sell off all the 69 specific parts, have the frame pulled and transfer everything from the 70

[JB400]

How about fixing them both and then acquiring a 68 for a complete collection?

[nvrbdn]

looks like a great purchase.

[hatersaurusrex]

I'd keep the taillights

[tan top]

   wow , thats a deal    
 looks like its been in a wreck  , see loads & loads of  parts  
chrome shift knob too  

whats the plan ?  is that yellow in engine bay ??

[Baldwinvette77]

Called it 

[Cooter]

Well, it goes to show, Deals are still out there. I'd say you did well. Not too many woulda sold it like that. Most woulda stabbed a frt clip on it and asked big money.

[spoolinhard]

 wow , thats a deal    
 looks like its been in a wreck  , see loads & loads of  parts  
chrome shift knob too  

whats the plan ?  is that yellow in engine bay ??

Was a Y3 Cream car with black vinyl top and 383 2 barrel. Owner had this since the 80's. This is what he considered his parts car. In his shed he had a B5 blue 69 hemi charger, had a 383 4 barrel car next to it. Both were in nice original shape albeit with a coat of dust over them. He had shelving built against the walls that had rows of doors fenders and hoods. There were even 7 or 9 complete 69 grill assemblies. Throughout the shed there were also scattered sets of bucket seats, steering columns and various panels cut off of cars, such as quarters and innder fender wells and rear tail light panels. Also had a few dana 60's lying around. There were also  many complete big blocks. Everything was kind of scattered about the shed and very dusty. Other than the stuff on the shelf there was no order to the chaos, it was all over. Apparently he had another 69 stored somewhere else that was very solid. Oh, and I got to go up in the garage attached to his house, there he had many dashes, consoles and even a pair of NOS 70 quarter panels hanging from the rafters. There was also a complete Nascar hemi sitting on a stand. Apparently he parted many cars out during the 80's. He said that he never paid more than 200 for a parts car!

[70 sublime]

How did you happen to find this car ??

[rebby]

 wow , thats a deal    
 looks like its been in a wreck  , see loads & loads of  parts  
chrome shift knob too  

whats the plan ?  is that yellow in engine bay ??

Was a Y3 Cream car with black vinyl top and 383 2 barrel. Owner had this since the 80's. This is what he considered his parts car. In his shed he had a B5 blue 69 hemi charger, had a 383 4 barrel car next to it. Both were in nice original shape albeit with a coat of dust over them. He had shelving built against the walls that had rows of doors fenders and hoods. There were even 7 or 9 complete 69 grill assemblies. Throughout the shed there were also scattered sets of bucket seats, steering columns and various panels cut off of cars, such as quarters and innder fender wells and rear tail light panels. Also had a few dana 60's lying around. There were also  many complete big blocks. Everything was kind of scattered about the shed and very dusty. Other than the stuff on the shelf there was no order to the chaos, it was all over. Apparently he had another 69 stored somewhere else that was very solid. Oh, and I got to go up in the garage attached to his house, there he had many dashes, consoles and even a pair of NOS 70 quarter panels hanging from the rafters. There was also a complete Nascar hemi sitting on a stand. Apparently he parted many cars out during the 80's. He said that he never paid more than 200 for a parts car!

And... where is this shed??? 

Nice find! 

[spoolinhard]

I was looking for a unibody for structural pieces for my 70 hulk, my dad asked a mopar person in a nearby town and gave me this guys number. I wanted to take pics of his stuff but didnt ask. He asked that we not tell anyone about his stuff. He said that he was going to sell the hemi car, Im sure that when he does it will be on ebay.

[Budnicks]

Good score... Good luck with your 69-70 Charger melding projects

[areibel]

Nice Score!  And at least you'll be able to get one running from two dead ones. 
How bad is the wreck damage on the 69?   

[tan top]

 wow , thats a deal    
 looks like its been in a wreck  , see loads & loads of  parts  
chrome shift knob too  

whats the plan ?  is that yellow in engine bay ??

Was a Y3 Cream car with black vinyl top and 383 2 barrel. Owner had this since the 80's. This is what he considered his parts car. In his shed he had a B5 blue 69 hemi charger, had a 383 4 barrel car next to it. Both were in nice original shape albeit with a coat of dust over them. He had shelving built against the walls that had rows of doors fenders and hoods. There were even 7 or 9 complete 69 grill assemblies. Throughout the shed there were also scattered sets of bucket seats, steering columns and various panels cut off of cars, such as quarters and innder fender wells and rear tail light panels. Also had a few dana 60's lying around. There were also  many complete big blocks. Everything was kind of scattered about the shed and very dusty. Other than the stuff on the shelf there was no order to the chaos, it was all over. Apparently he had another 69 stored somewhere else that was very solid. Oh, and I got to go up in the garage attached to his house, there he had many dashes, consoles and even a pair of NOS 70 quarter panels hanging from the rafters. There was also a complete Nascar hemi sitting on a stand. Apparently he parted many cars out during the 80's. He said that he never paid more than 200 for a parts car!

  tri color combo of Y3 black top & tan interior

  sounds like that guy has some collection of mopar hardware

thanks for sharing the story & info 

[Mopar Nut]

That's awesome!

[charger_fan_4ever]

Any nice drivers side 70 fender in the parts bin ?

[mikeydf14]

Of the four Chargers I have owned I bought my first three for $1,500 each time in 1971 (69) another in 1973 (69) another in 1975 (68). However my fourth Charger (68) I bought in 2003 was a tad more than $1,500................   

[spoolinhard]

Nice Score!  And at least you'll be able to get one running from two dead ones. 
How bad is the wreck damage on the 69?   

Not as bad as I originally thought. The drivers front frame can be salvaged. The inner fender will have to be replaced obviously. Gonna need a frame pull and then the forward maybe six inches of that frame replaced as it is the only section that is really wrinkled. I am going to use the whole radiator support from the 70

[spoolinhard]

Any nice drivers side 70 fender in the parts bin ?

I have a decent one that is going to need a little work. I have all the difficult 70 pieces and no 69 stuff, another good reason for a 70 build.

[charger_fan_4ever]

Any nice drivers side 70 fender in the parts bin ?

I have a decent one that is going to need a little work. I have all the difficult 70 pieces and no 69 stuff, another good reason for a 70 build.

I was meaning in the sellers nest. I have bought 2 now. Sold the 1st one as it needed alot of straightening and paid more $$ for a supposed NOS reprimed from surface rust. They forgot to mention they sandblasted both sides and had to putty both sides of the fender to get it straight and somewhat rigid.  

The only metal left to work on my 70 is the darn drivers side fender.

[70moparman]

Wish it was 1983 right now... Id be cleaning up on the Mopars!!!  Some of us were born too late to get these stupid prices you guys once bought mopar muscle for... God damnit...   

[ACUDANUT]

Those prices might have been cheaper back then, but our paychecks couldn't buy that much either. 

[1974dodgecharger]

Those prices might have been cheaper back then, but our paychecks couldn't buy that much either. 

Think my dada was happy making 200 bucks a week workin in a factory assembly line.....now that's minimal wage salaries for 40 hours

[Budnicks]

yeah my first job was $1.65 an hour working {other than working for my Pop's Awning Company, I was slave labor, but got a few parts for my 68 Charger or gas money} my 1st real paying job was for, Paul Peterson Shell Service/Gas Station & I was happy working 30 hrs a week making about $50 a week before taxes & tips for service/repairs...LOL...

[ACUDANUT]

I "think" I made 500 a month back then (84) maybe 300 I will have to check. The Marines did not make me rich.

[rt green]

75 bucks every 2 weeks in 1978  high school job  standard station

[spoolinhard]

Any nice drivers side 70 fender in the parts bin ?

I have a decent one that is going to need a little work. I have all the difficult 70 pieces and no 69 stuff, another good reason for a 70 build.

I was meaning in the sellers nest. I have bought 2 now. Sold the 1st one as it needed alot of straightening and paid more $$ for a supposed NOS reprimed from surface rust. They forgot to mention they sandblasted both sides and had to putty both sides of the fender to get it straight and somewhat rigid.  

The only metal left to work on my 70 is the darn drivers side fender.

He did not, he was a 69 guy. He did part out one 70, it was an R/T. The parts he had left from it made me cringe. He parted it in the 80's when it was a running car. Didnt have much left from it though. If there would have been fenders I would have been all over them. My drivers fender is definately usable but is going to take some work to do so.