News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

A/C BELT ROUTING PICTURE

Started by ALBSURE1091, April 04, 2013, 10:25:18 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ALBSURE1091

April 04, 2013, 10:25:18 AM
I have a 69 Charger with a 318 and factory A/C. Would anyone have a picture of the proper routing for the A/C compresser belt? The compresser has a single pulley. There is one "wheel" so to speak to the right of compresser that has no groove in it for a V belt so I am thinking the top part of the belt would go against it. Thanks

472 R/T SE

#1
April 18, 2013, 03:23:19 AM
Give Chris' site a look/see.   :shruggy:

http://www.1969chargerregistry.com/

Nacho-RT74

#2
April 21, 2013, 08:53:45 AM
it should be dual belt/pulley for compressor
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

John_Kunkel

#3
April 21, 2013, 04:47:03 PM

A single-groove pulley with an idler inboard of it doesn't sound "factory" unless it's a factory add-on.
Pardon me but my karma just ran over your dogma.

kab69440

#4
April 22, 2013, 06:43:17 AM
I have a '68 small block compressor out in the garage. It also has a single pulley. I believe the idler on it is grooved.
Imagination was given to man to compensate him for what he is not;  a sense of humor to console him for what he is.      Francis Bacon

WANT TO BUY:
Looking for a CD by  'The Sub-Mersians'  entitled "Raw Love Songs From My Garage To Your Bedroom"

Also, any of the various surf-revival compilation albums this band has contributed to.
Thank you,    Kenny

Jesus drove a Honda. He wasn't proud of it, though...
John 12: 49     "...for I did not speak of my own Accord."

Nacho-RT74

#5
April 22, 2013, 01:14:27 PM
RV2 or York Compressor ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Pete in NH

#6
April 23, 2013, 08:18:43 AM
Hi,

I have a diagram in a 69 Plymouth shop manual that shows a single belt drive set up for the A/C on a 318 with factory air. It shows a single belt on the RV-2 compressor with an idler pulley on the left of the compressor. There is a roller to the right of the compressor, and yes, the belt top surface rides on the top left side of the roller.

ALBSURE1091

#7
May 16, 2013, 02:49:23 PM
Yes it's factory air with a single pulley. Thanks for all the input. Pete in NH nailed it. She running cool!! Thanks!!
Print
Go Up Pages1
User actions