News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Wheels studs the same front and rear?

Started by Dino, May 10, 2013, 10:40:46 AM

Previous topic - Next topic

Dino

I bought 5 RH threaded studs from Rockauto for the ds rear drum and now I need 5 more for the front.  Are they the same?

WAGNER Part # BD61235   



Extraordinary claims require extraordinary evidence.

cdr

NO, there are 3 differnt for the front,,disc,10.5,11,brakes,take an old one out & measure the serrated area.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Dino

Extraordinary claims require extraordinary evidence.

cdr



Representative
Dorman® AutoGrade™ - Wheel Stud
Dorman® AutoGrade™ - Wheel Stud

$1.99 Each
Add to Printable List
Online: Currently Unavailable
Store: Available

    1 year limited warranty
    1/2-20 Serrated Wheel Stud - .625 In. Knurl, 1-5/8 In. Length
    Front Right
    1-5/8 Inch Length
    With 10 Inch Front Drum
    Motor Wheel
    Quantity Per Vehicle: 1

Part # : 610-039   |  Line: DOR
Dorman® AutoGrade™ - Wheel Stud
Dorman® AutoGrade™ - Wheel Stud

$2.59 Each
Add to Printable List
Online: Currently Unavailable
Call Store: Usually Avail. 24 Hrs
Find store with item

    1 year limited warranty
    1/2-20 Serrated Wheel Stud - .650 In. Knurl, 1-9/16 In. Length
    Front Right
    1-9/16 Inch Length
    With 10 Inch Front Drum
    Budd
    Quantity Per Vehicle: 1

Part # : 610-122   |  Line: DOR

Representative
Dorman® AutoGrade™ - Wheel Stud
Dorman® AutoGrade™ - Wheel Stud

$3.99 Each
Add to Printable List
Online: Currently Unavailable
Store: Available

    1 year limited warranty
    1/2-20 Serrated Wheel Stud - .650 In. Knurl, 1-5/8 In. Length
    Front Right
    1-5/8 Inch Length
    With 11 Inch Front Drum
    Quantity Per Vehicle: 1

Part # : 610-132   |  Line: DOR
Dorman® AutoGrade™ - Wheel Stud
Dorman® AutoGrade™ - Wheel Stud

$1.79 Each
Add to Printable List
Online: Currently Unavailable
Call Store: Usually Avail. 24 Hrs
Find store with item

    1 year limited warranty
    1/2-20 Serrated Wheel Stud - .637 In. Knurl, 1-3/4 In. Length
    Front Right
    Front Disc Brakes
    Quantity Per Vehicle: 1

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Dino

I have drums up front so all I have to do is measure to see if it's 10.5 or 11 right?  Is that the inside diameter?  I'd like to have the studs before I knock out the old.  I hope they don't have that little flattened rim around the studs or I may not be able to get them out.
Extraordinary claims require extraordinary evidence.

cdr

when i did mine what i 1st got was wrong ,so i had to compare an old one,,,& mine had the flattened swedge,i used my air hammer. 
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Dino

Quote from: cdr on May 10, 2013, 12:07:17 PM
when i did mine what i 1st got was wrong ,so i had to compare an old one,,,& mine had the flattened swedge,i used my air hammer. 

Damn...haven't got anything like that.  What if I put the drum on a block of wood and give the stud a little love tap with a sledge.  Will that do it or am I gonna be looking for another drum?   :icon_smile_big:
Extraordinary claims require extraordinary evidence.

JB400

You need an excuse to put the disc brakes on anyway :2thumbs: ;)

Dino

Quote from: stroker400 wedge on May 10, 2013, 12:17:16 PM
You need an excuse to put the disc brakes on anyway :2thumbs: ;)

I would but since it looks like I'm going with 17" rims, I'm not going to use my 10.75" Wilwood kit and will instead get something in the 12-13" range BUT I didn't budget for those so I'm not going to buy those any time soon, hence the need for new studs so I can install my wheels.

I though about installing the wilwood kit for a while but it seems like a lot of work and I don't have much time.  I'll ask my mechanic though, maybe they can do it for a small fee....
Extraordinary claims require extraordinary evidence.

Mopar Nut

Buy a right side drum with wheel studs and install it on the left side. Don't they come with studs?
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

Dino

Quote from: Mopar Nut on May 10, 2013, 01:30:59 PM
Buy a right side drum with wheel studs and install it on the left side. Don't they come with studs?

That's a good point...maybe someone here has a drum for sale.  I'll post a wanted ad.
Extraordinary claims require extraordinary evidence.