I would like to build....

[A383Wing]

....a thank-you tribute to all my friends I have made over the years. As most here know, I'm out of work due to disability health issues....it's a chore to even get up and take the dog for his walks in the morning, but enough of that.

I want to build a "license plate" board in my garage with car or truck plates from all the states. I will put members names & forum names under each one that I get. If anyone has just one old plate from the state that they are in, or have any other plates from any other states, I would welcome them. I have no money to pay anyone, I'm not asking for charity, I just need something to do at this point.

I don't need any Washington plates, lord knows I got about 20 here from all my cars that I have owned. I do have one from Nebraska that I traded someone a while ago. They do not have to be Mopar themed at all....any old crappy normal plate will do

Anyone wanna donate a plate? Send me a PM for my address if you don't already have it. Some plates off my cars in picture below

Thanks, Bryan  (only need 1 plate, not two)

[Aero426]

I will send you a nice WI plate.   I have a lifetime supply.

[Cooter]

I Would send a Va. Plate, but I might not be a firend you've made over the years.

[41husk]

Illinois

[moparstuart]

 missouri and kansas   

[A383Wing]

I'll make it easy here, picture below with name & address....if ya have something, I'll take it...hang on...making picture better

Bryan

[A383Wing]

I Would send a Va. Plate, but I might not be a firend you've made over the years.

I got nothing negative to say about you or anyone here, Cooter..no worries..if ya got a plate, I'll take it


And thanks Doug, Stu, & 41husk...I'll take one if you have a spare

Bryan

[skip68]

Bryan is upset with me in another thread but I still have a plate for him if he wants it.      It's a plain jane Nevada plate from my work van.   

[skip68]

Actually I've got two that can go.   One from California and one from Nevada but they're not old.   

[areibel]

I can cover a PA one!

[Dans 68]

Actually I've got two that can go.   One from California and one from Nevada but they're not old.   

So where is that 2nd Calif black and yellow plate?   

Dan

[ITSA426]

MN in the mail Monday.

[A383Wing]

thanks..you could have sent me that mauve car as well...I would not turn it down

Bryan

[mauve66]

send it to him, then we can call him GRANDPA Pinky

[Fred]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

[ChargerD100]

I got a idaho plate just gotta find what I did with it 

[NHCharger]

I've got a box full of old plates I bought from a friend of the wife's when she sold her house. I'm sure I have a plate from the 60's. It will be in the mail this week.


**EDIT**
Just remember I started a spread sheet for all the plates. These are the plates just from NH. I have a bunch from other States but never got around to being this anal. I'm keeping the 68 & 69 sets FW 4. Any other other plate you can have. Let me know which one(s) you want.



      
1932      1954
1- plate      1- plate

1966      1967
1- plate      1 - farm set
      1- trailer

1968                     1969
1- vanity set? FW 4   1 - vanity plate -PMJ-
1 - reg. set                1 - vanity set? FW 4
1 - Agr. plate        2 - reg. sets
                        1 - reg. plate
                        1 - trailer plate
                        1 - Commer. plate

1970   
1 - trailer plate   
1 - tractor plate   
1 - reg. plate   
2 - reg. sets, consecutive numbers FG804 & FG805   

1971   2 - reg. sets, consecutive numbers FG804 & FG805
1 - trailer plate   
1- vanity plate IRSTR   
2 - reg. plates   
1 - reg. set of plates   

1972   
2 - trailer plates   
2 - tractor plates   
5 - reg. sets of plates      

1973      
2 - trailer plates      
1 - diesel plate      
1 - vanity plate VDBLU      
1 - vanity set IRSTR      
3 - reg. plates      
3 - reg. set of plates, two are consecutive. FO645 & FO646      

1974      1975
1 - vanity plate SNUFL      1 - RC plate
1 - vanity set XX-ON      1 - Agr. plate
      1 - reg. set of plates

[mauve66]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

that's what NV says too, i just tell them they got lost or stolen................

[kab69440]

Do you have an OH plate? I have a few expired generic ones from past beaters.

[A383Wing]

Do you have an OH plate? I have a few expired generic ones from past beaters.

nope...if ya wanna donate it, I'll take it...name & address in my post above that has my card in it

Thanks, Bryan

[Bob T]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

Same, otherwise I 'd send you one from NZ, will have a look around my mates panelshop anyway.
Wall idea is a good one though

[Tilar]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

What??? No flashlight, screwdriver and unsuspecting asshole neighbor close by?    Just be careful of the ones that might have a gun under their pillow.

[A383Wing]

MN in the mail Monday.

I gotta couple of plates from Lee today...thanks

Bryan

[Fred]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

What??? No flashlight, screwdriver and unsuspecting asshole neighbor close by?    Just be careful of the ones that might have a gun under their pillow.

I have all 3. None of the neighbours are gun owners so I should be alright.    I'm the only one that owns guns in our area so I can give it my best shot! 

[70moparman]

I have over 300 tags from 47 different states... Let me know which ones you have a hard time finding, and I will pass any doubles of those states your way...  I have an Alaska, and Hawaii for you as well...  Will need your address to mail them to you...

[Tilar]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

What??? No flashlight, screwdriver and unsuspecting asshole neighbor close by?    Just be careful of the ones that might have a gun under their pillow.

I have all 3. None of the neighbours are gun owners so I should be alright.    I'm the only one that owns guns in our area so I can give it my best shot! 

  Good to go then. 

Bryan, One Aussie plate coming up!     

Ok, just kidding, don't get too excited. 

[A383Wing]

Wow...thanks

I wish I got to keep my original plates that were on my 66 since new...DMV made me turn them in when I got personalized plates back in the early 80's...if I knew then what I know now, I would have just turned one in....now they don't ask for plates to be turned in anymore

Bryan

[A383Wing]

gonna go a different route in mounting the plates to the pegboard...the metal hooks are quite expensive...so I ordered a box of the plastic push-in style fasteners today for $20 with shipping to me...I was not gonna pay the $60-$80 for the metal hooks.

I do have some hooks here that I will use until the plastic trees arrive

Bryan

[A383Wing]

one more thing....just because someone from a state sent me a plate, that does not mean I can't have more than one from that state....just sayin'

gonna start working on it this weekend...weather is supposed to be crappy

Bryan

[Fred]

We're not allowed to save them here. When we apply for new one's, the old ones have to be handed in or destroyed.

What??? No flashlight, screwdriver and unsuspecting asshole neighbor close by?    Just be careful of the ones that might have a gun under their pillow.

I have all 3. None of the neighbours are gun owners so I should be alright.    I'm the only one that owns guns in our area so I can give it my best shot! 

  Good to go then. 

Bryan, One Aussie plate coming up!     

Ok, just kidding, don't get too excited. 

Well I would have sent it but the ducks have taken off already. 

[A383Wing]

don't give it to the monkeys..they can't paddle over here anyway

Bryan

[69bronzeT5]

I'll send a British Columbia one

[A383Wing]

Did a little playing around today....me thinks I'm gonna need a bigger board. Also, I got no place to hang a 4x8 sheet all at once. So I may get one more piece of peg board and cut both up to fit on the front garage wall around the one window.

Anyway, pic below. Most of the Washington plates are from our cars or cars we used to own. I'll get a list together of what plate went with each car when I settle into my chair for the night in a few days.

Our cars we had or still own are/were:

black 66 Charger, 64 Nova, 68 Barracuda, the Daytona, 73 Pontiac Grandville, 2003 PT Cruiser, both 66 Darts we had.

The plates I got from members here and on other sites have been added as well. I'll get names & plates posted as well.

Thanks guys, Bryan

[A383Wing]

I gotta few plates yesterday...I know who sent the New York plate on the right...but no "forum name" of the 2 on the left...I'm keeping names to the plates that are sent my way.

Thanks again

Bryan

[jaak]

Hey Bryan,

Do you have an Alabama plate. If not pm me your address and I will send you one.

Jason

[A383Wing]

PM sent...thanks

Bryan

[A383Wing]

Got one pegboard up today with some plates attached....I thank everyone so far that has sent me a plate (or 2)

Bryan

[A383Wing]

I got more plates this week...I gotta move the Daytona to hang them up...pics to come this weekend

Bryan

[A383Wing]

Plate board updated...I'm gonna have to go get another sheet of pegboard. Those who sent me plates can see them here...thanks

Bryan

[JB400]

So, have you been busy on this project?



Had to knock some cobwebs off this one

[A383Wing]

Well, ya..kinda...I got a bunch more plates to hang up...but I still have to get another sheet of pegboard....most of our time has been taken up with talking with creditors for getting my hospital bills paid, and also dealing with our mortgage loan people to get our house payment low enough so we can survive on my disability income.

I'm gonna have to borrow a neighbors truck to get the pegboard, it won't fit in or on my little short bed 94 Dakota

I ain't fergot about this, I got the plates to hang sitting on the wing of the Daytona right now....

Bryan

[Cooter]

Looks goid Bryan.

[Fred]

Looks goid Bryan.