plastic loom for interior wiring

[FJ5WING]

I have the plastic tube that secures the interior wiring behind the E brake pedal assembly but I have no idea how its held in place. I didn't remove this the shop did and they don't have the attaching hardware.

H E L P!

[bill440rt]

It gets held in place by two plastic push clips. They get inserted into the two holes in the pillar.
They are/were just white plastic clips with an "arrow" shape to the end of it. Any plastic clip with the right diameter would work for this (think plastic fender liners on newer cars). It gets covered by the kick panel so you won't see it once installed. Try an auto body supply or a good hardware store for some plastic push clips.

[FJ5WING]

Thanks Bill!

[bill440rt]

Just make sure you get the right diameter.
Most fender liner type clips are too small. The holes are some wacky larger size.