Any 2nd Gen guys have a coolant overflow reservoir?

[Back N Black]

 I want to install one but not sure what will fit?

[b5blue]

All I know is for 70's its 69.00 for the plastic reservoir and 89.00 for the bracket that holds the darn thing! 

[tan top]

All I know is for 70's its 69.00 for the plastic reservoir and 89.00 for the bracket that holds the darn thing! 

     i was thinking along the same lines  , fitting  one to mine !! from a later B-body !
     there is a thread somewhere ! Nacho posted a few pictures of the overflow tank  on  later cars!  one type goes down the side of the radiator where the horns are & the other , which i was liking  goes  behind the radiator on the driver side , held in place by a bracket !  bolted to the core support ! but  what put me off this one is you need to drill holes for the bracket !& its near the stamped  vin numbers !   

[RECHRGD]

If your not into original looking stuff, I use a nice stainless steel cylindrical unit that looks pretty good.  I'll try to post a picture for you tomorrow.  Bob

[1969chargerrtse]

I have my tube running into a black plastic oil quart container stuffed down on the right side , if facing the motor.  Never leaks on the ground.

[Purple68]

I'm just running a plastic one with a sight tube from Summit. It was 20 bucks but I did have to drill the rad support to mount it.

[Cooter]

Sure do! Got tired of the radiator puking on the ground, so I got one of those cheapo kits from the auto parts store and mounted right beside the radiator....

[Hemidog]

I installed this one in between the grille and radiator support, and painted it black.

http://www.summitracing.com/parts/SUM-300102/

[firefighter3931]

I installed this one in between the grille and radiator support, and painted it black.

http://www.summitracing.com/parts/SUM-300102/

I installed the same unit on mine 


Ron

[1974dodgecharger]

Well that's solves my question earlier in a post