News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

correct pushrods for 440 with rolller rockers

Started by charger01, June 17, 2006, 11:43:31 PM

Previous topic - Next topic

charger01

Iam trying to replace the pushrods in my 69 440 hp motor.  It has crane cam gold aluminum 1.5 rockers and and comp cam 292 h cam.  Crane cam recommend part number 64672 for a low block and part number 64673 for a high block.  Iam assuming my motor is a low block?  Correct?  but when I pull up that part number it shows for 383-400 only.  what do you guys think?

BigBlockSam

howdy
first , your 440 is a raised block, rb. 383 and 400's are low blocks. with the roller rockers you need a ball and cup push rod. special order. hope that helps. Rene
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

charger01


BigBlockSam

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

mopar0166

What was the length off push rod you went with?  im told by edelbrock to use 9.125

i have an edel heads cam and comp roller rockers