Flaming River tilt floor shift column wiring?

[hawaiico]

Anybody got a wiring diagram to help me get through this retrofit?  
1972 Charger HT originally with column shift:   Thanks

[Nacho-RT74]

there is no difference on wiring between both... just the gear selector light.

-On column is not used the orange wire on main ignition switch harness... just not used, not removed. There is not exist that wire and socket inside the column what does exist on column shifter.

-The new wire up to floor shifter gear selector runs in two parts. One from the orange lighting wire source ( around the A/C-heater area on underdash wiring ) untill the passenger side kick panel... runs AAALL the dash frame. Starts on male bullet kind terminal and ends on spade female terminal. Form there runs the other section wire, and starts on male spade terminal up to one wire socket to floor shifter selector( ground is by chassis ).

Rest of wirirng is exactly the same